|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Wilmar in the Atlas, the following communities of the 1890's would have been found near the current location of Wilmar. The following communities are listed based on their distance, with the one closest to Wilmar listed first.
- Bristow
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Bristow
- Bristow is located in Butler County
- Population from the 2020 Census: 147 people
- Allison
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Allison have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allison
- Allison is located in Butler County
- Population from the 2020 Census: 965 people
- Jump to TripAdvisor's Tourism page for Allison <3>
- Greene
(5 miles [8 km] to the north)
- Dumont
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Dumont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dumont
- Dumont is located in Butler County
- Population from the 2020 Census: 595 people
- Jump to TripAdvisor's Tourism page for Dumont <3>
- Butler Center
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Butler Center
- Butler Center is located in Butler County
- Clarksville
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Butler County
- Population from the 2020 Census: 1,333 people
- Jump to TripAdvisor's Tourism page for Clarksville <3>
- Aredale
(8 miles [12.9 km] to the west)
- Marble Rock
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Marble Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble Rock
- Marble Rock is located in Floyd County
- Population from the 2020 Census: 287 people
- Jump to TripAdvisor's Tourism page for Marble Rock <3>
- Powersville
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Powersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Powersville
- Powersville is located in Floyd County
- Coster
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Coster. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Coster
- Coster is located in Butler County
- Hansell
(14 miles [22.5 km] to the west)
- Shell Rock
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Shell Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shell Rock
- Shell Rock is located in Butler County
- Population from the 2020 Census: 1,268 people
- Jump to TripAdvisor's Tourism page for Shell Rock <3>
- Plainfield
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Plainfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainfield
- Plainfield is located in Bremer County
- Population from the 2020 Census: 413 people
- Jump to TripAdvisor's Tourism page for Plainfield <3>
- Aplington
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Aplington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aplington
- Aplington is located in Butler County
- Population from the 2020 Census: 1,039 people
- Jump to TripAdvisor's Tourism page for Aplington <3>
- Parkersburg
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkersburg
- Parkersburg is located in Butler County
- Population from the 2020 Census: 1,913 people
- Jump to TripAdvisor's Tourism page for Parkersburg <3>
- Rockford
(17 miles [27.4 km] to the north)
- Nashua
(17 miles [27.4 km] to the northeast)
- Geneva
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Franklin County
- Population from the 2020 Census: 154 people
- Jump to TripAdvisor's Tourism page for Geneva <3>
- Waverly Junction
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Waverly Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waverly Junction
- Waverly Junction is located in Bremer County
- Horton
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Horton
- Horton is located in Bremer County
- Charles City
(18 miles [29 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Charles City. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Charles City
- Charles City is located in Floyd County
- Population from the 2020 Census: 7,217 people
- Jump to TripAdvisor's Tourism page for Charles City <3>
- Hampton
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Hampton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hampton
- Hampton is located in Franklin County
- Population from the 2020 Census: 4,162 people
- Jump to TripAdvisor's Tourism page for Hampton <3>
- Faulkner
(19 miles [30.6 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Faulkner. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Faulkner
- Faulkner is located in Franklin County
- Finchford
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Finchford
- Finchford is located in Black Hawk County
- Waverly
(19 miles [30.6 km] to the east)
- Bradford
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Bradford
- Bradford is located in Chickasaw County
- Floyd Crossing
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Floyd Crossing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Floyd Crossing
- Floyd Crossing is located in Floyd County
- Sheffield
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Sheffield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sheffield
- Sheffield is located in Franklin County
- Population from the 2020 Census: 1,096 people
- Chapin
(19 miles [30.6 km] to the west)
- Jump to our Gazetteer entry for Chapin
- Chapin is located in Franklin County
Off-the-Road Links ...
The official website for Butler County: www.butlercoiowa.org/ The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wilmar, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|