A Gazetteer for the United States and Canada

Sumner, Iowa

Nearby Census Genealogy
Cemeteries Tidbits &
Other IA

Census Data for Sumner ...

Population ...

The most recent Census Estimate<1> was for 2018 and it gave Sumner a population of 1,961 people.

The last Decennial Census<2> was in 2010, which gave Sumner a population of 2,028 people.

The city of Sumner is located in Bremer County. The 2010 Census gave Bremer County a population of 24,276 people. This means that Sumner had 8.35% of the county's total population, making it Bremer's 2nd most populous community.

At the same time, Iowa had a population of 3,046,355 people, meaning that Sumner had 0.07% of the total population of Iowa - making it the state's 160th most populous community.

Area ...

When the Census Bureau conducts a census for a city like Sumner, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.

Things like the population, area and housing for Sumner reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Sumner might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.

The 2010 Census shows that the sampling area for Sumner has a total area of 2.53 square miles [6.6 km²]. Of this total, a small amount of the area is covered by water (0.01 square miles [0 km²]).

Bremer County has a land area of 435.5 square miles [1,127.9 km²]. At 2.52 square miles [6.5 km²], Sumner has 0.58% of the county's total land area.

Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:

Lat:   42° 50' 57"   (or 42.85°)             [Map]

Lon:   -92° 5' 49"   (or -92.1°)

More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).

Population Density ...

Using the population (2,028 people) and land area (2.52 square miles [6.5 km²]) values from the 2010 Census, Sumner had a population density of 800 people per square mile [309.2 people/km²].

In comparison, the 2000 Census shows Sumner had a population of 2,106 people and a land area of 2.53 square miles [6.5 km²]. This gives a population density of 833 people per square mile [321.9 people/km²]

NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Sumner. You need to be careful when making such a comparison, the differences are likely to lead to an apple-to-oranges comparison. More information about these differences can be found in the section Census-to-Census Observations ... (see below).

Housing Units ...

At the time of the 2010 Census, Sumner had 944 Housing Units<3> and with its population of 2,028 people, this averages 2.15 people per Housing Unit.

The 2010 Census shows Sumner had a land area of 2.52 square miles [6.5 km²]. This translates to 372.8 Housing Units per square mile [143.9 housing units/km²].

From the Census of 2000: Sumner had 930 Housing Units, a population of 2,106 people and a land area of 2.53 square miles [6.5 km²]. This gives a density of 2.26 people per Housing Unit and 368.2 Housing Units per square mile [142.2 housing units/km²].

NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 Census and the 2010 Census, there were changes in the sampling area for Sumner and you need to be careful when comparing numbers between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).

Bremer County ...

The community of Sumner is primarily located in Bremer County. A portion of Sumner extends into Fayette County.

The county had a population of 24,276 people at the 2010 Census. With it's population of 2,028 people, Sumner represented 8.35% of the county's total.

In addition, where the city of Sumner has a population density of 800 people per square mile [309.2 people/km²], Bremer County averages 55.7 people per square mile [21.52 people/km²].

For more information, please visit our Census Page for Bremer County.

Population Rings for Sumner ...

To help identify the number of people who live in Sumner and the surrounding area, we have drawn concentric rings centered on Sumner. We counted the number of communities within each ring and summed their populations.<4>

  Radius   No of
  Since 2010    
5 mi   [8 km]11,961-3.3%
10 mi   [16 km]75,097-1.66%
15 mi   [24 km]1415,532-3.35%
20 mi   [32 km]2335,229-1.55%
25 mi   [40 km]3945,292-1.48%
30 mi   [48 km]54173,360+0.24%

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Sumner, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Sumner. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Area ...

There is only a very minor difference in the sampling area given between the 2010 Census and the 2000 Census.

The 2010 Census shows that the total area for Sumner was 2.53 square miles [6.6 km²]. Of this total, 2.52 square miles [6.5 km²] is land, with the balance (0.51%) being water (0.01 square miles [0 km²]).

The 2000 Census shows a total area of 2.53 square miles [6.5 km²]. Of this total, only a minor amount of the area is covered by water.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Sumner, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Sumner.

For the 2010 Census, the location was given as:

Lat:   42.849372°   (or 42°50'57" N)             [Map]

Lon:   -92.097154°   (or -92°5'49" W)

For the 2000 Census, the location given was:

Lat:   42.849969°   (or 42°50'59" N)             [Map]

Lon:   -92.099738°   (or -92°5'59" W)

The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 724 feet to the east<5> of the location that was used in the 2000 Census.

The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#468764) to Sumner. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Sumner. The GNIS point has been mapped to the latitude/longitude:

Lat:   42.849702°   (or 42°50'58" N)             [Map]

Lon:   -92.096286°   (or -92°5'46" W)

The GSP location given for the 2010 Census lies 261.3 feet to the southwest<6> of the point given by the GNIS for Sumner. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Sumner.

Miscellaneous Information for Sumner ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Bremer County or the city of Sumner:

The GNIS Codes ...

The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Sumner:

GNIS ID for Sumner: 468764

GNIS ID for Bremer County: 465198

GNIS ID for Iowa: 1779785

The FIPS Codes ...

An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):

State Code: 19 (Iowa)

County Code: 017 (Bremer County)

Place Code: 76260 (Sumner)

State & County Code: 19/017 (Iowa / Bremer County)

State & Place Code: 19/76260 (Iowa / Sumner)

Misc. Census Codes ...

Sumner is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).

The US Postal Service ZIP Code ...

While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a city like Sumner, it does identify addresses that are in (or near) Sumner. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.

The ZIP code for Sumner: 50674<7>

Census ZCTA Codes ...

The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).

ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.

For more information about the various Federal identification codes, please visit our Misc Page for Sumner.

Other Roadside Stops ...

Search for a Community in Iowa

About Bremer County

About Iowa

Off-the-Road Links ...

The official website of the U.S. Census Bureau

Unfortunately, we don't know of a website for Sumner. If you can help, please contact us through our Feedback Page.

The official website for Bremer County:

The official website for State of Iowa:

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2018.
<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.
<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).
<4>The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.
<5>The calculated bearing (or angle) to the 2010 Census location is 252 degrees and a distance of 724 feet.
<6>The calculated bearing (or angle) to the GNIS point is 117 degrees and a distance of 261.3 feet.
<7>When looking for a ZIP Code, whether Sumner or elsewhere, it's always best to check the website of the United States Postal Service (USPS).






Sitemap Privacy
of Use



Copyright 2019
All Rights Reserved

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

This page was last modified: 26 Jan 2020