RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Guthrie County >> Stuart >> Nearby Communities - 1890sIndex...

Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Stuart had a population of 2,052 people in 1895 with a post office and railroad service. In 2020, Stuart had a population of 1,756 people.

The following communities are listed based on their distance from Stuart, with the one closest to Stuart listed first.

  • Dexter
    (4 miles [6.4 km] to the east)
  • Menlo
    (4 miles [6.4 km] to the west)
  • Dale
    (6 miles [9.7 km] to the north)
    • Dale is located in Guthrie County
    • Jump to our Gazetteer entry for Dale
  • Glendon
    (7 miles [11.3 km] to the northwest)
    • Glendon is located in Guthrie County
    • Jump to our Gazetteer entry for Glendon
  • Arbor Hill
    (9 miles [14.5 km] to the south)
    • Arbor Hill is located in Adair County
    • Jump to our Gazetteer entry for Arbor Hill
  • Redfield
    (9 miles [14.5 km] to the northeast)
  • Monteith
    (10 miles [16.1 km] to the northwest)
    • Monteith is located in Guthrie County
    • Jump to our Gazetteer entry for Monteith
  • Linden
    (10 miles [16.1 km] to the north)
    • Linden is located in Dallas County
    • Jump to our Gazetteer entry for Linden
    • Population from the 2020 Census: 214 people
  • Casey
    (10 miles [16.1 km] to the west)
  • Pitzer
    (11 miles [17.7 km] to the southeast)
    • Pitzer is located in Madison County
    • Jump to our Gazetteer entry for Pitzer
  • Kennedy
    (12 miles [19.3 km] to the northeast)
    • Kennedy is located in Dallas County
    • Jump to our Gazetteer entry for Kennedy
  • Canby
    (13 miles [20.9 km] to the southwest)
    • Canby is located in Adair County
    • Jump to our Gazetteer entry for Canby
  • Panora
    (13 miles [20.9 km] to the north)
  • Greenfield
    (15 miles [24.1 km] to the southwest)
  • Guthrie Center
    (15 miles [24.1 km] to the northwest)
  • DeSoto
    (16 miles [25.7 km] to the east)
  • Adair
    (16 miles [25.7 km] to the west)
  • Hebron
    (17 miles [27.4 km] to the south)
    • Hebron is located in Adair County
    • Jump to our Gazetteer entry for Hebron
  • Adel
    (17 miles [27.4 km] to the northeast)
    • Adel is located in Dallas County
    • Jump to our Gazetteer entry for Adel
    • Population from the 2020 Census: 5,607 people
    • Jump to TripAdvisor's Tourism page for Adel <2>
  • Panther
    (17 miles [27.4 km] to the northeast)
    • Panther is located in Dallas County
    • Jump to our Gazetteer entry for Panther
  • Fanslers
    (18 miles [29 km] to the north)
    • Fanslers is located in Guthrie County
    • Jump to our Gazetteer entry for Fanslers
  • Fontanelle
    (19 miles [30.6 km] to the southwest)
    • Fontanelle is located in Adair County
    • Jump to our Gazetteer entry for Fontanelle
    • Population from the 2020 Census: 612 people
  • Winterset
    (19 miles [30.6 km] to the southeast)
  • Van Meter
    (19 miles [30.6 km] to the east)
  • Yale
    (19 miles [30.6 km] to the north)
    • Yale is located in Guthrie County
    • Jump to our Gazetteer entry for Yale
    • Population from the 2020 Census: 239 people

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Stuart, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.