RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Story County >> Slater >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Slater (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Slater. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Slater is located in Story County.

To see how the shape of Iowa's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Story County: Boone, Hamilton, Hardin, Jasper, Marshall & Polk.

Below are the counties that are near Slater. For each of these counties, we show a sample of those communities that are closest to Slater:

  • Story County     (The home county of Slater)
  • Boone County
    • The following are listed by their distance from Slater, with the one closest to Slater listed first.
    • Madrid
      (7 miles [11.3 km] to the west)
    • Luther
      (9 miles [14.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Luther. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Luther
      • Luther is located in Boone County
      • Population from the 2020 Census: 133 people
      • Google driving directions:
      • From your current location to Luther
      • From Slater to Luther
    • Jordan
      (13 miles [20.9 km] to the northwest)
    • Boone
      (16 miles [25.7 km] to the northwest)
    • Moingona
      (16 miles [25.7 km] to the northwest)
    • Centerville
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Centerville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Centerville
      • Centerville is located in Boone County
    • Mackey
      (20 miles [32.2 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Mackey. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mackey
      • Mackey is located in Boone County
      • Google driving directions:
      • From your current location to Mackey
      • From Slater to Mackey
    • Ogden
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Ogden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ogden
      • Ogden is located in Boone County
      • Population from the 2020 Census: 1,985 people
      • Jump to TripAdvisor's Tourism page for Ogden <2>
    • Fraser
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Fraser have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fraser
      • Fraser is located in Boone County
      • Population from the 2020 Census: 103 people
    • Berkley
      (22 miles [35.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Berkley. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Berkley
      • Berkley is located in Boone County
      • Population from the 2020 Census: 33 people
      • Google driving directions:
      • From your current location to Berkley
      • From Slater to Berkley
    • Beaver
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Beaver have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaver
      • Beaver is located in Boone County
      • Population from the 2020 Census: 50 people
    • Pilot Mound
      (26 miles [41.8 km] to the northwest)
    • Boxholm
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Boxholm have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boxholm
      • Boxholm is located in Boone County
      • Population from the 2020 Census: 184 people
      • Jump to TripAdvisor's Tourism page for Boxholm <2>
  • Dallas County
  • Greene County
    • The following are listed by their distance from Slater, with the one closest to Slater listed first.
    • Rippey
      (27 miles [43.5 km] to the west)
    • Grand Junction
      (30 miles [48.3 km] to the west)
      • Note: The GPS coordinates that we are using for Grand Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grand Junction
      • Grand Junction is located in Greene County
      • Population from the 2020 Census: 757 people
      • Jump to TripAdvisor's Tourism page for Grand Junction <2>
  • Hamilton County
    • The following are listed by their distance from Slater, with the one closest to Slater listed first.
    • Randall
      (25 miles [40.2 km] to the north)
    • Jewell
      (29 miles [46.7 km] to the north)
    • Stanhope
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Stanhope have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stanhope
      • Stanhope is located in Hamilton County
      • Population from the 2020 Census: 394 people
    • Stratford
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Stratford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stratford
      • Stratford is located in Hamilton County
      • Population from the 2020 Census: 692 people
      • Jump to TripAdvisor's Tourism page for Stratford <2>
    • Ellsworth
      (30 miles [48.3 km] to the north)
  • Hardin County
    • Garden City
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Garden City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Garden City
      • Garden City is located in Hardin County
  • Jasper County
  • Marshall County
    • The following are listed by their distance from Slater, with the one closest to Slater listed first.
    • Rhodes
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Rhodes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rhodes
      • Rhodes is located in Marshall County
      • Population from the 2020 Census: 298 people
    • State Center
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for State Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for State Center
      • State Center is located in Marshall County
      • Population from the 2020 Census: 1,432 people
      • Jump to TripAdvisor's Tourism page for State Center <2>
    • Malta
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Malta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malta
      • Malta is located in Marshall County
    • Melbourne
      (29 miles [46.7 km] to the east)
    • Saint Anthony
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Saint Anthony have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Anthony
      • Saint Anthony is located in Marshall County
      • Population from the 2020 Census: 101 people
  • Polk County
    • The following are listed by their distance from Slater, with the one closest to Slater listed first.
    • Sheldahl
      (Less than 2 miles to the southwest)
    • Polk City Junction
      (5 miles [8 km] to the south)
    • Alleman
      (5 miles [8 km] to the southeast)
    • Polk City
      (7 miles [11.3 km] to the south)
    • Elkhart
      (9 miles [14.5 km] to the southeast)
    • Andrews
      (9 miles [14.5 km] to the southwest)
    • Ankeny
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Ankeny have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ankeny
      • Ankeny is located in Polk County
      • Population from the 2020 Census: 70,068 people
      • Jump to TripAdvisor's Tourism page for Ankeny <2>
    • Herrold
      (11 miles [17.7 km] to the south)
    • Loring
      (12 miles [19.3 km] to the east)
    • Carney
      (13 miles [20.9 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Carney. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Carney
      • Carney is located in Polk County
      • Google driving directions:
      • From your current location to Carney
      • From Slater to Carney
    • Johnston
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Johnston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Johnston
      • Johnston is located in Polk County
      • Population from the 2020 Census: 23,092 people
      • Jump to TripAdvisor's Tourism page for Johnston <2>
    • Saylorville
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Saylorville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saylorville
      • Saylorville is located in Polk County
    • Grimes
      (14 miles [22.5 km] to the southwest)
  • Warren County
    • The following are listed by their distance from Slater, with the one closest to Slater listed first.
    • Lakewood
      (25 miles [40.2 km] to the south)
    • Orillia
      (25 miles [40.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Orillia. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Orillia
      • Orillia is located in Warren County
      • Google driving directions:
      • From your current location to Orillia
      • From Slater to Orillia
    • Cumming
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Cumming have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cumming
      • Cumming is located in Warren County
      • Population from the 2020 Census: 413 people
      • Jump to TripAdvisor's Tourism page for Cumming <2>

For an expanded list of the communities that are closest to Slater, see our County-by-County Page for Slater.

Cemeteries Near Slater ...

Below are cemeteries that are in the vicinity of Slater.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Slater covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Slater, with the one closest to Slater listed first.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

The Rand McNally Atlas shows that in 1895, Slater had a post office and railroad service. In 2020, Slater had a population of 1,471 people.

These communities are listed based on their distance from Slater, with the one closest to Slater listed first.

  • Sheldahl
    (Less than 2 miles to the southwest)
  • Huxley
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Huxley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Huxley
    • Huxley is located in Story County
    • Population from the 2020 Census: 4,270 people
    • Jump to TripAdvisor's Tourism page for Huxley <2>
  • Polk City Junction
    (5 miles [8 km] to the south)
  • Kelley
    (5 miles [8 km] to the north)
  • High Bridge
    (7 miles [11.3 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for High Bridge. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for High Bridge
    • High Bridge is located in Dallas County
    • Google driving directions:
    • From your current location to High Bridge
    • From Slater to High Bridge
  • Crocker
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Crocker have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crocker
    • Crocker is located in Polk County
  • Cambridge
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Cambridge have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cambridge
    • Cambridge is located in Story County
    • Population from the 2020 Census: 796 people
    • Jump to TripAdvisor's Tourism page for Cambridge <2>
  • Madrid
    (7 miles [11.3 km] to the west)
  • Elkhart
    (9 miles [14.5 km] to the southeast)
  • Luther
    (9 miles [14.5 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Luther. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Luther
    • Luther is located in Boone County
    • Population from the 2020 Census: 133 people
    • Google driving directions:
    • From your current location to Luther
    • From Slater to Luther
  • Ontario
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Ontario have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ontario
    • Ontario is located in Story County
  • Ames
    (10 miles [16.1 km] to the north)
  • Continue List   (16 more) ...
    • Granger
      (11 miles [17.7 km] to the southwest)
    • Ankeny
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Ankeny have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ankeny
      • Ankeny is located in Polk County
      • Population from the 2020 Census: 70,068 people
      • Jump to TripAdvisor's Tourism page for Ankeny <2>
    • Ingersoll ‑ Historic
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Ingersoll have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ingersoll
      • Ingersoll is located in Dallas County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Slater. See our List of 1890's Communities around Slater.

Newspapers Published in the Vicinity of Slater ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 255 newspapers that have been published in the area around Slater.

We have organized these newspapers into two lists:

  • A Local Newspaper List - focusing on the papers published in the immediate area of Slater. There are actually two parts to this list - papers printed in the immediate area of Slater and those printed in the larger area surrounding Slater.
  • An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 29 miles [46.7 km]<5> of Slater.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Slater:

The official website for Slater: www.slater-iowa.org/

The official website for Story County: www.storycounty.com/

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Slater) to Point B.Our distance measurements begin at a specific point in Slater. The point we use is located at these GPS coordinates - Latitude: 41.8779, Longitude: -93.6784    
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Slater, please let us know so that we can improve our accuracy.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025