A Gazetteer for the United States and Canada
Census Data for Paton ...
The most recent Census Estimate<1> was for 2018 and it gave Paton a population of 230 people.
The last Decennial Census<2> was in 2010, which gave Paton a population of 236 people.
The city of Paton is located in Greene County. The 2010 Census gave Greene County a population of 9,336 people. This means that Paton had 2.53% of the county's total population, making it Greene's 6th most populous community.
At the same time, Iowa had a population of 3,046,355 people.
When the Census Bureau conducts a census for a city like Paton, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
Things like the population, area and housing for Paton reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Paton might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Paton has a total area of 0.56 square miles [1.5 km²]. Of this total, a small amount of the area is covered by water (0 square miles [0 km²]).
Greene County has a land area of 569 square miles [1,475.2 km²]. At 0.56 square miles [1.5 km²], Paton has 0.1% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 42° 9' 50" (or 42.16°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (236 people) and land area (0.56 square miles [1.5 km²]) values from the 2010 Census, Paton had a population density of 417.7 people per square mile [161.3 people/km²].
In comparison, the 2000 Census shows Paton had a population of 265 people and a land area of 0.57 square miles [1.5 km²]. This gives a population density of 467.6 people per square mile [180.5 people/km²]
NOTE: Be aware that when comparing population density between the 2000 and the 2010 Census, there were changes in the sampling area for Paton. You need to be careful when making such a comparison, the differences are likely to lead to an incorrect comparison. More information about the nature of these differences can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Paton had 120 Housing Units<3> and with its population of 236 people, this averages 1.97 people per Housing Unit.
The 2010 Census shows Paton had a land area of 0.56 square miles [1.5 km²]. This translates to 212.4 Housing Units per square mile [82 housing units/km²].
From the Census of 2000: Paton had 126 Housing Units, a population of 265 people and a land area of 0.57 square miles [1.5 km²]. This gives a density of 2.1 people per Housing Unit and 222.3 Housing Units per square mile [85.8 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 Census and the 2010 Census, there were changes in the sampling area for Paton and you need to be careful when comparing results between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).
Greene County ...
The community of Paton is located in Greene County.
The county had a population of 9,336 people at the 2010 Census. With it's population of 236 people, Paton represented 2.53% of the county's total.
In addition, where the city of Paton has a population density of 417.7 people per square mile [161.3 people/km²], Greene County averages 16.39 people per square mile [6.33 people/km²].
For more information, please visit our Census Page for Greene County.
Population Rings for Paton ...
To help identify the number of people who live in Paton and the surrounding area, we have drawn concentric rings centered on Paton. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Paton, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Paton. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
There is only a very minor difference in the sampling area given between the 2010 Census and the 2000 Census.
The 2010 Census shows that the total area for Paton was 0.56 square miles [1.5 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 0.57 square miles [1.5 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Paton, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Paton.
For the 2010 Census, the location was given as:
Lat: 42.163959° (or 42°9'50" N) [Map]
For the 2000 Census, the location given was:
Lat: 42.163887° (or 42°9'49" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 29.9 feet to the northeast<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2396160) to Paton. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Paton. The GNIS point has been mapped to the latitude/longitude:
Lat: 42.164183° (or 42°9'51" N) [Map]
The GSP location given for the 2010 Census lies 94.4 feet to the southeast<6> of the point given by the GNIS for Paton. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Paton.
Miscellaneous Information for Paton ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Greene County or the city of Paton:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Paton:
GNIS ID for Paton: 2396160
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 19 (Iowa)
County Code: 073 (Greene County)
Place Code: 61815 (Paton)
Misc. Census Codes ...
Paton is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
The US Postal Service ZIP Code ...
While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a city like Paton, it does identify addresses that are in (or near) Paton. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
The ZIP code for Paton: 50217<7>
Census ZCTA Codes ...
The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.
For more information about the various Federal identification codes, please visit our Misc Page for Paton.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Paton. If you can help, please contact us through our Feedback Page.
The official website for State of Iowa: https://www.iowa.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 27 Aug 2019