RoadsideThoughts
A Gazetteer for the United States and Canada
Community
Index
State
Index
Province
Index
County
Index
State
Quarters
 
Sitemap
     
 

Parkview Terrace, Iowa

Community
Profile
Nearby Census Genealogy
Helper
Cemeteries Tidbits &
Trivia
Local
Newspapers
TripAdvisor
Links
Interactive
Map
Wish
List
Other IA
Communities

1890 Communities Near Parkview Terrace ...

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during on-going research.

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during on-going research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Parkview Terrace in the Atlas, the following communities of the 1890's would have been found near the current location of Parkview Terrace.

Adaville   (Plymouth County)       [Map]  
 - Located 11 miles [17.7 km]<2> to the West Southwest (WSW) from Parkview Terrace
 - Adaville had a post office and no railroad service
 
Akron   (Plymouth County)       [Map]  
 - Located 18 miles [29 km] to the West (W) from Parkview Terrace
 - 1895 population of 494 people (with 1,473 people in 2018)
 - Akron had a post office and railroad service
 
Alton   (Sioux County)       [Map]  
 - Located 16 miles [25.7 km] to the North Northeast (NNE) from Parkview Terrace
 - 1895 population of 708 people (with 1,264 people in 2018)
 - Alton had a post office and railroad service
 
Carnes   (Sioux County)       [Map]  
 - Located 11 miles [17.7 km] to the Northeast (NE) from Parkview Terrace
 - Carnes had a post office and railroad service
 
Chatsworth   (Sioux County)       [Map]  
 - Located 18 miles [29 km] to the West Northwest (WNW) from Parkview Terrace
 - Chatsworth had a post office and railroad service
 
Crathorne   (Plymouth County)       [Map]  
 - Located 7 miles [11.3 km] to the West (W) from Parkview Terrace
 - Crathorne had a post office and no railroad service
 
Hinton   (Plymouth County)       [Map]  
 - Located 13 miles [20.9 km] to the South Southwest (SSW) from Parkview Terrace
 - 1895 population of 48 people (with 941 people in 2018)
 - Hinton had a post office and railroad service
 
Ireton   (Sioux County)       [Map]  
 - Located 14 miles [22.5 km] to the North Northwest (NNW) from Parkview Terrace
 - 1895 population of 412 people (with 604 people in 2018)
 - Ireton had a post office and railroad service
 
James   (Plymouth County)       [Map]  
 - Located 16 miles [25.7 km] to the South Southwest (SSW) from Parkview Terrace
 - 1895 population of 21 people
 - James had a post office and railroad service
 
Kingsley   (Plymouth County)       [Map]  
 - Located 18 miles [29 km] to the Southeast (SE) from Parkview Terrace
 - 1895 population of 649 people (with 1,401 people in 2018)
 - Kingsley had a post office and railroad service
 
Le Mars   (Plymouth County)       [Map]  
 - Located Less than 2 miles to the Southeast (SE) from Parkview Terrace
 - 1895 population of 4,036 people (with 9,996 people in 2018)
 - Le Mars had a post office and railroad service
 
Leeds   (Woodbury County)       [Map]  
 - Located 19 miles [30.6 km] to the South Southwest (SSW) from Parkview Terrace
 - Leeds had a post office and railroad service
 
Marcus   (Cherokee County)       [Map]  
 - Located 19 miles [30.6 km] to the East (E) from Parkview Terrace
 - 1895 population of 671 people (with 1,061 people in 2018)
 - Marcus had a post office and railroad service
 
Maurice   (Sioux County)       [Map]  
 - Located 11 miles [17.7 km] to the North (N) from Parkview Terrace
 - Maurice had a post office and railroad service
 
Merrill   (Plymouth County)       [Map]  
 - Located 5 miles [8 km] to the South Southwest (SSW) from Parkview Terrace
 - 1895 population of 32 people (with 736 people in 2018)
 - Merrill had a post office and railroad service
 
Neptune   (Plymouth County)       [Map]  
 - Located 9 miles [14.5 km] to the South (S) from Parkview Terrace
 - Neptune had a post office and no railroad service
 
O'Leary   (Plymouth County)       [Map]  
 - Located 8 miles [12.9 km] to the Southeast (SE) from Parkview Terrace
 - O'Leary had a post office and no railroad service
 
Orange City   (Sioux County)       [Map]  
 - Located 15 miles [24.1 km] to the North Northeast (NNE) from Parkview Terrace
 - 1895 population of 1,216 people (with 6,107 people in 2018)
 - Orange City had a post office and railroad service
 
Oyens   (Plymouth County)       [Map]  
 - Located 6 miles [9.7 km] to the East Northeast (ENE) from Parkview Terrace
 - 1895 population of 112 people (with 101 people in 2018)
 - Oyens had a post office and railroad service
 
Potosia   (Plymouth County)       [Map]  
 - Located 12 miles [19.3 km] to the Southwest (SW) from Parkview Terrace
 - Potosia had a post office and no railroad service
 
Remsen   (Plymouth County)       [Map]  
 - Located 10 miles [16.1 km] to the East (E) from Parkview Terrace
 - 1895 population of 580 people (with 1,621 people in 2018)
 - Remsen had a post office and railroad service
 
Seney   (Plymouth County)       [Map]  
 - Located 4 miles [6.4 km] to the Northeast (NE) from Parkview Terrace
 - 1895 population of 83 people
 - Seney had a post office and railroad service
 
Sioux Center   (Sioux County)       [Map]  
 - Located 19 miles [30.6 km] to the North (N) from Parkview Terrace
 - 1895 population of 8 people (with 7,614 people in 2018)
 - Sioux Center had a post office and no railroad service
 
Struble   (Plymouth County)       [Map]  
 - Located 6 miles [9.7 km] to the North (N) from Parkview Terrace
 - Struble had a post office and railroad service
 
Union Center   (Plymouth County)       [Map]  
 - Located 9 miles [14.5 km] to the Southeast (SE) from Parkview Terrace
 - Union Center had a post office and no railroad service

Other Roadside Stops ...



Communities in Iowa

About Plymouth County

About Iowa

Off-the-Road Links ...

The official website for Plymouth County: www.co.plymouth.ia.us/

The official website for State of Iowa: https://www.iowa.gov/



Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Parkview Terrace, please let us know so that we can improve our accuracy.

- Return to Citation

<2>Our distances are not driving distances, but are calculated as a 'straight-line' distance from Parkview Terrace. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Parkview Terrace) to Point B.

Our distance measurements begin at a specific point in Parkview Terrace. The point that we are using is located at these GPS coordinates - Latitude: 42.7944, Longitude: -96.1878     [Map].   In this case, the coordinates for Parkview Terrace have been provided by the Geographic Names Information System (GNIS).

- Return to Citation



 
 
 
 
 
 

Home
Page
Sitemap Privacy
Statement
Terms
of Use
Feedback

 
 

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

Copyright 2019
All Rights Reserved
This page was last modified: 27 Aug 2019
By John Hall