A Gazetteer for the United States and Canada
Mount Ayr, Iowa
Census Data for Mount Ayr ...
The most recent Census Estimate<1> was for 2018 and it gave Mount Ayr a population of 1,643 people.
The last Decennial Census<2> was in 2010, which gave Mount Ayr a population of 1,691 people.
The city of Mount Ayr is located in Ringgold County. The 2010 Census gave Ringgold County a population of 5,131 people. This means that Mount Ayr had 32.96% of the county's total population, making it Ringgold's most populous community.
When the Census Bureau conducts a census for a city like Mount Ayr, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
Things like the population, area and housing for Mount Ayr reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Mount Ayr might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Mount Ayr has a total area of 2.69 square miles [7 km²]. Of this total, a small amount of the area is covered by water (0.02 square miles [0.1 km²]).
Ringgold County has a land area of 535 square miles [1,386.9 km²]. At 2.67 square miles [6.9 km²], Mount Ayr has 0.5% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 40° 42' 51" (or 40.71°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (1,691 people) and land area (2.67 square miles [6.9 km²]) values from the 2010 Census, Mount Ayr had a population density of 628 people per square mile [242.8 people/km²].
In comparison, the 2000 Census shows Mount Ayr had a population of 1,822 people and a land area of 2.53 square miles [6.6 km²]. This gives a population density of 718 people per square mile [277.4 people/km²]
NOTE: Be aware that when comparing population density between the 2000 and the 2010 Census, there were changes in the sampling area for Mount Ayr. You need to be careful when making such a comparison, the differences are likely to lead to a questionable comparison. More information about the nature of these changes can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Mount Ayr had 822 Housing Units<3> and with its population of 1,691 people, this averages 2.06 people per Housing Unit.
The 2010 Census shows Mount Ayr had a land area of 2.67 square miles [6.9 km²]. This translates to 305.7 Housing Units per square mile [118 housing units/km²].
From the Census of 2000: Mount Ayr had 856 Housing Units, a population of 1,822 people and a land area of 2.53 square miles [6.6 km²]. This gives a density of 2.13 people per Housing Unit and 337.5 Housing Units per square mile [130.3 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Mount Ayr and you need to be careful when comparing values between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).
Ringgold County ...
The county had a population of 5,131 people at the 2010 Census. With it's population of 1,691 people, Mount Ayr represented 32.96% of the county's total.
In addition, where the city of Mount Ayr has a population density of 628 people per square mile [242.8 people/km²], Ringgold County averages 9.58 people per square mile [3.7 people/km²].
For more information, please visit our Census Page for Ringgold County.
Population Rings for Mount Ayr ...
To help identify the number of people who live in Mount Ayr and the surrounding area, we have drawn concentric rings centered on Mount Ayr. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Mount Ayr, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Mount Ayr. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 6.03% larger than the 2000 Census.
The 2010 Census shows that the total area for Mount Ayr was 2.69 square miles [7 km²]. Of this total, 2.67 square miles [6.9 km²] is land, with the balance (0.78%) being water (0.02 square miles [0.1 km²]).
The 2000 Census shows a total area of 2.54 square miles [6.6 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Mount Ayr, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Mount Ayr.
For the 2010 Census, the location was given as:
Lat: 40.714311° (or 40°42'51" N) [Map]
For the 2000 Census, the location given was:
Lat: 40.714210° (or 40°42'51" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 350.1 feet to the west<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#468415) to Mount Ayr. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Mount Ayr. The GNIS point has been mapped to the latitude/longitude:
Lat: 40.714159° (or 40°42'50" N) [Map]
The GSP location given for the 2010 Census lies 67.9 feet to the northwest<6> of the point given by the GNIS for Mount Ayr. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Mount Ayr.
Miscellaneous Information for Mount Ayr ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Ringgold County or the city of Mount Ayr:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Mount Ayr:
GNIS ID for Mount Ayr: 468415
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 19 (Iowa)
County Code: 159 (Ringgold County)
Place Code: 54480 (Mount Ayr)
Misc. Census Codes ...
Mount Ayr is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
The US Postal Service ZIP Code ...
While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a city like Mount Ayr, it does identify addresses that are in (or near) Mount Ayr. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
The ZIP code for Mount Ayr: 50854<7>
Census ZCTA Codes ...
The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.
For more information about the various Federal identification codes, please visit our Misc Page for Mount Ayr.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Mount Ayr. If you can help, please contact us through our Feedback Page.
The official website for State of Iowa: https://www.iowa.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 27 Aug 2019