|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Minburn had a population of 247 people in 1895 with a post office and railroad service. In 2020, Minburn had a population of 357 people.
The following communities are listed based on their distance from Minburn, with the one closest to Minburn listed first.
- Panther
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Panther. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Panther
- Panther is located in Dallas County
- Google driving directions:
- From your current location to Panther
- From Minburn to Panther
- Dallas Center
(6 miles [9.7 km] to the southeast)
- Perry
(6 miles [9.7 km] to the northwest)
- Bouton
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Bouton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bouton
- Bouton is located in Dallas County
- Population from the 2020 Census: 125 people
- Jump to TripAdvisor's Tourism page for Bouton <3>
- Woodward
(8 miles [12.9 km] to the northeast)
- Adel
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Adel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Adel
- Adel is located in Dallas County
- Population from the 2020 Census: 5,607 people
- Jump to TripAdvisor's Tourism page for Adel <3>
- Ortonville
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Ortonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ortonville
- Ortonville is located in Dallas County
- Ingersoll ‑ Historic
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Ingersoll have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ingersoll
- Ingersoll is located in Dallas County
- Granger
(10 miles [16.1 km] to the east)
- Angus
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Angus have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Angus
- Angus is located in Boone County
- Kennedy
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Kennedy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kennedy
- Kennedy is located in Dallas County
- Dawson
(11 miles [17.7 km] to the northwest)
- Waukee
(12 miles [19.3 km] to the southeast)
- High Bridge
(12 miles [19.3 km] to the northeast)
- Berkley
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Berkley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Berkley
- Berkley is located in Boone County
- Population from the 2020 Census: 33 people
- Google driving directions:
- From your current location to Berkley
- From Minburn to Berkley
- Grimes
(13 miles [20.9 km] to the east)
- Madrid
(13 miles [20.9 km] to the northeast)
- Linden
(14 miles [22.5 km] to the southwest)
- Redfield
(14 miles [22.5 km] to the southwest)
- DeSoto
(15 miles [24.1 km] to the south)
- Campbell
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Campbell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbell
- Campbell is located in Polk County
- Clive
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Clive have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clive
- Clive is located in Polk County
- Population from the 2020 Census: 17,444 people
- Jump to TripAdvisor's Tourism page for Clive <3>
- Rippey
(15 miles [24.1 km] to the northwest)
- Jamaica
(15 miles [24.1 km] to the northwest)
- Van Meter
(16 miles [25.7 km] to the south)
- Yale
(16 miles [25.7 km] to the west)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Minburn. If you can help, please contact us through our Feedback Page. The official website for Dallas County: www.co.dallas.ia.us/ The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Minburn, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|