|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, McBride had a post office and no railroad service.
The following communities are listed based on their distance from McBride, with the one closest to McBride listed first.
- Patterson
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Madison County
- Population from the 2020 Census: 163 people
- Booneville
(6 miles [9.7 km] to the north)
- Van Meter
(6 miles [9.7 km] to the north)
- Winterset
(7 miles [11.3 km] to the southwest)
- DeSoto
(7 miles [11.3 km] to the northwest)
- Bevington
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Bevington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bevington
- Bevington is located in Warren County
- Population from the 2020 Census: 69 people
- Jump to TripAdvisor's Tourism page for Bevington <2>
- Churchville
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Churchville
- Churchville is located in Warren County
- Cumming
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Cumming have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cumming
- Cumming is located in Warren County
- Population from the 2020 Census: 413 people
- Jump to TripAdvisor's Tourism page for Cumming <2>
- Conger
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Conger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conger
- Conger is located in Warren County
- Prole
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Prole have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prole
- Prole is located in Warren County
- Hanley
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Hanley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanley
- Hanley is located in Madison County
- Saint Charles
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Charles have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Charles
- Saint Charles is located in Madison County
- Population from the 2020 Census: 656 people
- Jump to TripAdvisor's Tourism page for Saint Charles <2>
- Wick
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Wick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wick
- Wick is located in Warren County
- Orillia
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Orillia. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Orillia
- Orillia is located in Warren County
- Commerce
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Commerce. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Commerce
- Commerce is located in Polk County
- Waukee
(12 miles [19.3 km] to the north)
- Ortonville
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Ortonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ortonville
- Ortonville is located in Dallas County
- Pitzer
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Pitzer. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pitzer
- Pitzer is located in Madison County
- Adel
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Adel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Adel
- Adel is located in Dallas County
- Population from the 2020 Census: 5,607 people
- Jump to TripAdvisor's Tourism page for Adel <2>
- Saint Marys
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Marys have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Marys
- Saint Marys is located in Warren County
- Population from the 2020 Census: 127 people
- Norwalk
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Norwalk have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norwalk
- Norwalk is located in Polk County
- Population from the 2020 Census: 12,449 people
- Jump to TripAdvisor's Tourism page for Norwalk <2>
- Ashawa
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Ashawa have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashawa
- Ashawa is located in Polk County
- Ord
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ord. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ord
- Ord is located in Madison County
- East Peru
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for East Peru. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for East Peru
- East Peru is located in Madison County
- Population from the 2020 Census: 133 people
- Spring Hill
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Hill
- Spring Hill is located in Warren County
- Population from the 2020 Census: 65 people
- Campbell
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Campbell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbell
- Campbell is located in Polk County
- Clive
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Clive have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clive
- Clive is located in Polk County
- Population from the 2020 Census: 17,444 people
- Jump to TripAdvisor's Tourism page for Clive <2>
Off-the-Road Links ...
The official website for Madison County: www.madisoncoia.us/ The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about McBride, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|