|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Ludlow in the Atlas, the following communities of the 1890's would have been found near the current location of Ludlow. The following communities are listed based on their distance, with the one closest to Ludlow listed first.
- Frankville
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Frankville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Frankville
- Frankville is located in Winneshiek County
- Washington Prairie
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Washington Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Washington Prairie
- Washington Prairie is located in Winneshiek County
- Waukon
(5 miles [8 km] to the northeast)
- Thoten
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Thoten have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thoten
- Thoten is located in Winneshiek County
- Castalia
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Castalia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castalia
- Castalia is located in Winneshiek County
- Population from the 2020 Census: 156 people
- Postville
(9 miles [14.5 km] to the south)
- Rossville
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Rossville
- Rossville is located in Allamakee County
- Hardin
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hardin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hardin
- Hardin is located in Clayton County
- Lycurgus
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Lycurgus. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lycurgus
- Lycurgus is located in Allamakee County
- Freeport
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Freeport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freeport
- Freeport is located in Winneshiek County
- Nordness
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Nordness have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nordness
- Nordness is located in Winneshiek County
- Ossian
(11 miles [17.7 km] to the southwest)
- Volney
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Volney
- Volney is located in Allamakee County
- Luana
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Luana have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luana
- Luana is located in Clayton County
- Population from the 2020 Census: 276 people
- Jump to TripAdvisor's Tourism page for Luana <4>
- Elon
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Elon. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Elon
- Elon is located in Allamakee County
- Decorah
(12 miles [19.3 km] to the northwest)
- Waterville
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Waterville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterville
- Waterville is located in Allamakee County
- Population from the 2020 Census: 142 people
- Springwater
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Springwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springwater
- Springwater is located in Winneshiek County
- Monona
(14 miles [22.5 km] to the southeast)
- Calmar
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Calmar have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calmar
- Calmar is located in Winneshiek County
- Population from the 2020 Census: 934 people
- Jump to TripAdvisor's Tourism page for Calmar <4>
- Highlandville
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Highlandville
- Highlandville is located in Winneshiek County
- Watson
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Watson. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Watson
- Watson is located in Clayton County
- Locust
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust
- Locust is located in Winneshiek County
- Quandahl
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Quandahl. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Quandahl
- Quandahl is located in Allamakee County
- Festina
(16 miles [25.7 km] to the southwest)
- Dover Mills
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Dover Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover Mills
- Dover Mills is located in Fayette County
- Clermont
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Clermont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clermont
- Clermont is located in Fayette County
- Population from the 2020 Census: 580 people
- Jump to TripAdvisor's Tourism page for Clermont <4>
- Conover
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Conover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conover
- Conover is located in Winneshiek County
Off-the-Road Links ...
The official website for Allamakee County: www.co.allamakee.ia.us/ The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ludlow, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|