Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Kellogg had a population of 700 people in 1895 with a post office and railroad service. In 2020, Kellogg had a population of 585 people.
The following communities are listed based on their distance from Kellogg, with the one closest to Kellogg listed first.
- Murphy
(5 miles [8 km] to the southwest) - Newton
(6 miles [9.7 km] to the west)- Jump to our Gazetteer entry for Newton
- Newton is located in Jasper County
- Population from the 2020 Census: 15,127 people
- Jump to TripAdvisor's Tourism page for Newton <3>
- Killduff
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Killduff
- Killduff is located in Jasper County
- Coal Siding ‑ Historic
(8 miles [12.9 km] to the southwest)- Note: The GPS coordinates that we are using for Coal Siding have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coal Siding
- Coal Siding is located in Jasper County
- Grinnell
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Grinnell
- Grinnell is located in Poweshiek County
- Population from the 2020 Census: 9,096 people
- Jump to TripAdvisor's Tourism page for Grinnell <3>
- Newburg
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Newburg
- Newburg is located in Jasper County
- Sully
(10 miles [16.1 km] to the south)- Jump to our Gazetteer entry for Sully
- Sully is located in Jasper County
- Population from the 2020 Census: 826 people
- Jump to TripAdvisor's Tourism page for Sully <3>
- Reasnor
(11 miles [17.7 km] to the southwest) - Galesburg
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Galesburg
- Galesburg is located in Jasper County
- Lynnville
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Lynnville
- Lynnville is located in Jasper County
- Population from the 2020 Census: 393 people
- Jump to TripAdvisor's Tourism page for Lynnville <3>
- Laurel
(11 miles [17.7 km] to the north) - Metz
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Metz
- Metz is located in Jasper County
- Gilman
(12 miles [19.3 km] to the northeast) - Searsboro
(14 miles [22.5 km] to the southeast)- Jump to our Gazetteer entry for Searsboro
- Searsboro is located in Poweshiek County
- Population from the 2020 Census: 145 people
- Baxter
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Baxter
- Baxter is located in Jasper County
- Population from the 2020 Census: 1,132 people
- Jump to TripAdvisor's Tourism page for Baxter <3>
- Ferguson
(15 miles [24.1 km] to the north) - Ira
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Ira
- Ira is located in Jasper County
- Haverhill
(15 miles [24.1 km] to the north)- Note: The GPS coordinates that we are using for Haverhill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haverhill
- Haverhill is located in Marshall County
- Population from the 2020 Census: 168 people
- Jump to TripAdvisor's Tourism page for Haverhill <3>
- Monroe
(16 miles [25.7 km] to the southwest)- Jump to our Gazetteer entry for Monroe
- Monroe is located in Jasper County
- Population from the 2020 Census: 1,905 people
- Jump to TripAdvisor's Tourism page for Monroe <3>
- Ewart
(16 miles [25.7 km] to the east) - Dunbar
(16 miles [25.7 km] to the north)- Jump to our Gazetteer entry for Dunbar
- Dunbar is located in Marshall County
- Pickering
(16 miles [25.7 km] to the north) - Taintor
(17 miles [27.4 km] to the southeast)- Jump to our Gazetteer entry for Taintor
- Taintor is located in Mahaska County
- State Center Junction
(17 miles [27.4 km] to the northwest)- Note: The GPS coordinates that we are using for State Center Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for State Center Junction
- State Center Junction is located in Marshall County
- Colfax
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Colfax
- Colfax is located in Jasper County
- Population from the 2020 Census: 2,050 people
- Jump to TripAdvisor's Tourism page for Colfax <3>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Kellogg. If you can help, please contact us through our Feedback Page.
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Kellogg, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |