RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Tama County >> Dysart >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Dysart. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Dysart.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Dysart - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 39 communities listed:

  • Atkins
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Atkins have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atkins
    • Atkins is located in Benton County
    • Population from the 2020 Census: 1,978 people
    • Jump to TripAdvisor's Tourism page for Atkins <3>
  • Belle Plaine
    (19 miles [30.6 km] to the south)
  • Blairstown
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Blairstown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blairstown
    • Blairstown is located in Benton County
    • Population from the 2020 Census: 653 people
    • Jump to TripAdvisor's Tourism page for Blairstown <3>
  • Cedar Falls
    (26 miles [41.8 km] to the north)
  • Center Point
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Center Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Center Point
    • Center Point is located in Linn County
    • Population from the 2020 Census: 2,560 people
    • Jump to TripAdvisor's Tourism page for Center Point <3>
  • Chelsea
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Chelsea have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chelsea
    • Chelsea is located in Tama County
    • Population from the 2020 Census: 246 people
    • Jump to TripAdvisor's Tourism page for Chelsea <3>
  • Clutier
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Clutier have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clutier
    • Clutier is located in Tama County
    • Population from the 2020 Census: 203 people
    • Jump to TripAdvisor's Tourism page for Clutier <3>
  • Conrad
    (29 miles [46.7 km] to the west)
    • Note: The GPS coordinates that we are using for Conrad have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Conrad
    • Conrad is located in Grundy County
    • Population from the 2020 Census: 1,067 people
    • Jump to TripAdvisor's Tourism page for Conrad <3>
  • Dike
    (25 miles [40.2 km] to the northwest)
    • Jump to our Gazetteer entry for Dike
    • Dike is located in Grundy County
    • Population from the 2020 Census: 1,267 people
    • Jump to TripAdvisor's Tourism page for Dike <3>
  • Elberon
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Elberon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elberon
    • Elberon is located in Tama County
    • Population from the 2020 Census: 188 people
    • Jump to TripAdvisor's Tourism page for Elberon <3>
  • Evansdale
    (21 miles [33.8 km] to the north)
    • Note: The GPS coordinates that we are using for Evansdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Evansdale
    • Evansdale is located in Black Hawk County
    • Population from the 2020 Census: 4,734 people
    • Jump to TripAdvisor's Tourism page for Evansdale <3>
  • Gladbrook
    (20 miles [32.2 km] to the west)
  • Grundy Center
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Grundy Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grundy Center
    • Grundy Center is located in Grundy County
    • Population from the 2020 Census: 2,670 people
    • Jump to TripAdvisor's Tourism page for Grundy Center <3>
  • Holland
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holland
    • Holland is located in Grundy County
    • Population from the 2020 Census: 276 people
    • Jump to TripAdvisor's Tourism page for Holland <3>
  • Hudson
    (17 miles [27.4 km] to the northwest)
    • Jump to our Gazetteer entry for Hudson
    • Hudson is located in Black Hawk County
    • Population from the 2020 Census: 2,473 people
    • Jump to TripAdvisor's Tourism page for Hudson <3>
  • Independence
    (29 miles [46.7 km] to the northeast)
  • Jesup
    (24 miles [38.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Jesup have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jesup
    • Jesup is located in Black Hawk County
    • Population from the 2020 Census: 2,711 people
    • Jump to TripAdvisor's Tourism page for Jesup <3>
  • Keystone
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Keystone have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Keystone
    • Keystone is located in Benton County
    • Population from the 2020 Census: 615 people
    • Jump to TripAdvisor's Tourism page for Keystone <3>
  • La Porte City
    (11 miles [17.7 km] to the northeast)
  • Ladora
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Ladora have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ladora
    • Ladora is located in Iowa County
    • Population from the 2020 Census: 273 people
    • Jump to TripAdvisor's Tourism page for Ladora <3>
  • Le Grand
    (26 miles [41.8 km] to the southwest)
  • Marengo
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Marengo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marengo
    • Marengo is located in Iowa County
    • Population from the 2020 Census: 2,466 people
    • Jump to TripAdvisor's Tourism page for Marengo <3>
  • Montour
    (24 miles [38.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Montour have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montour
    • Montour is located in Tama County
    • Population from the 2020 Census: 242 people
    • Jump to TripAdvisor's Tourism page for Montour <3>
  • Morrison
    (22 miles [35.4 km] to the northwest)
  • Newhall
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Newhall have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Newhall
    • Newhall is located in Benton County
    • Population from the 2020 Census: 846 people
    • Jump to TripAdvisor's Tourism page for Newhall <3>
  • Norway
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Norway have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norway
    • Norway is located in Benton County
    • Population from the 2020 Census: 528 people
    • Jump to TripAdvisor's Tourism page for Norway <3>
  • Palo
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Palo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Palo
    • Palo is located in Linn County
    • Population from the 2020 Census: 1,075 people
    • Jump to TripAdvisor's Tourism page for Palo <3>
  • Reinbeck
    (18 miles [29 km] to the northwest)
    • Note: The GPS coordinates that we are using for Reinbeck have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reinbeck
    • Reinbeck is located in Grundy County
    • Population from the 2020 Census: 1,613 people
    • Jump to TripAdvisor's Tourism page for Reinbeck <3>
  • Rowley
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rowley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rowley
    • Rowley is located in Buchanan County
    • Population from the 2020 Census: 268 people
    • Jump to TripAdvisor's Tourism page for Rowley <3>
  • Shellsburg
    (23 miles [37 km] to the east)
  • Tama
    (19 miles [30.6 km] to the southwest)
  • Toddville
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Toddville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Toddville
    • Toddville is located in Linn County
    • Jump to TripAdvisor's Tourism page for Toddville <3>
  • Toledo
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Toledo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Toledo
    • Toledo is located in Tama County
    • Population from the 2020 Census: 2,125 people
    • Jump to TripAdvisor's Tourism page for Toledo <3>
  • Traer
    (8 miles [12.9 km] to the west)
  • Urbana
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Urbana have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Urbana
    • Urbana is located in Benton County
    • Population from the 2020 Census: 1,498 people
    • Jump to TripAdvisor's Tourism page for Urbana <3>
  • Victor
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Victor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Victor
    • Victor is located in Poweshiek County
    • Population from the 2020 Census: 865 people
    • Jump to TripAdvisor's Tourism page for Victor <3>
  • Vinton
    (14 miles [22.5 km] to the east)
  • Washburn
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Washburn have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Washburn
    • Washburn is located in Black Hawk County
    • Jump to TripAdvisor's Tourism page for Washburn <3>
  • Waterloo
    (22 miles [35.4 km] to the north)

Unfortunately, we don't know of an official website for Dysart. If you can help, please contact us through our Feedback Page.

The official website for Tama County: www.tamacounty.org/

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Dysart) to Point B.Our distance measurements begin at a specific point in Dysart. The point we use is located at these GPS coordinates - Latitude: 42.1720, Longitude: -92.3091       In this case, the coordinates for Dysart have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024