|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Ridgeway Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Ridgeway Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Ridgeway Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ridgeway
(Less than 2 miles to the southeast)
- Protivin
(7 miles [11.3 km] to the southwest)
- Spillville
(7 miles [11.3 km] to the south)
- Cresco
(7 miles [11.3 km] to the northwest)
- Vernon Springs
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Vernon Springs
- Vernon Springs is located in Howard County
- Bluffton
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Bluffton
- Bluffton is located in Winneshiek County
- Kendallville
(9 miles [14.5 km] to the north)
- Jump to our Gazetteer entry for Kendallville
- Kendallville is located in Winneshiek County
- Fort Atkinson
(11 miles [17.7 km] to the south)
- Calmar
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Calmar have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calmar
- Calmar is located in Winneshiek County
- Population from the 2020 Census: 934 people
- Jump to TripAdvisor's Tourism page for Calmar <2>
- Decorah
(11 miles [17.7 km] to the east)
- Burr Oak
(12 miles [19.3 km] to the northeast)
- Navan
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Navan. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Navan
- Navan is located in Winneshiek County
- Jackson Junction
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Jackson Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson Junction
- Jackson Junction is located in Winneshiek County
- Population from the 2020 Census: 54 people
- Festina
(14 miles [22.5 km] to the southeast)
- Florenceville
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Florenceville
- Florenceville is located in Howard County
- Jerico
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Jerico. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jerico
- Jerico is located in Chickasaw County
- Granger
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Granger. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Granger
- Granger is located in Fillmore County (MN)
- Canton
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Canton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canton
- Canton is located in Fillmore County (MN)
- Population from the 2020 Census: 342 people
- Jump to TripAdvisor's Tourism page for Canton <2>
- Davis Corners
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Davis Corners
- Davis Corners is located in Howard County
- Saint Lucas
(16 miles [25.7 km] to the south)
- Jump to our Gazetteer entry for Saint Lucas
- Saint Lucas is located in Fayette County
- Population from the 2020 Census: 134 people
- Ossian
(16 miles [25.7 km] to the southeast)
- Forest City ‑ Historic
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Forest City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest City
- Forest City is located in Howard County
- Harmony
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Harmony. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Fillmore County (MN)
- Population from the 2020 Census: 982 people
- Jump to TripAdvisor's Tourism page for Harmony <2>
- Lawler
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Lawler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawler
- Lawler is located in Chickasaw County
- Population from the 2020 Census: 422 people
- Jump to TripAdvisor's Tourism page for Lawler <2>
- Waucoma
(17 miles [27.4 km] to the south)
- Hesper
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Hesper
- Hesper is located in Winneshiek County
- Lime Springs
(17 miles [27.4 km] to the northwest)
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Ridgeway Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.3064, Longitude: -92.0063 In this case, the coordinates for the Ridgeway Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|