Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pleasant View Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pleasant View Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pleasant View Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Kellogg
(Less than 2 miles to the northeast)- Jump to our Gazetteer entry for Kellogg
- Kellogg is located in Jasper County
- Population from the 2020 Census: 585 people
- Jump to TripAdvisor's Tourism page for Kellogg <2>
- Killduff
(5 miles [8 km] to the south)- Jump to our Gazetteer entry for Killduff
- Killduff is located in Jasper County
- Oakland Acres
(5 miles [8 km] to the east)- Note: The GPS coordinates that we are using for Oakland Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakland Acres
- Oakland Acres is located in Jasper County
- Population from the 2020 Census: 161 people
- Newton
(6 miles [9.7 km] to the west)- Jump to our Gazetteer entry for Newton
- Newton is located in Jasper County
- Population from the 2020 Census: 15,127 people
- Jump to TripAdvisor's Tourism page for Newton <2>
- Sully
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Sully
- Sully is located in Jasper County
- Population from the 2020 Census: 826 people
- Jump to TripAdvisor's Tourism page for Sully <2>
- Lambs Grove
(8 miles [12.9 km] to the west)- Jump to our Gazetteer entry for Lambs Grove
- Lambs Grove is located in Jasper County
- Population from the 2020 Census: 165 people
- Reasnor
(9 miles [14.5 km] to the southwest) - Galesburg
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Galesburg
- Galesburg is located in Jasper County
- Lynnville
(10 miles [16.1 km] to the southeast)- Jump to our Gazetteer entry for Lynnville
- Lynnville is located in Jasper County
- Population from the 2020 Census: 393 people
- Jump to TripAdvisor's Tourism page for Lynnville <2>
- Grinnell
(10 miles [16.1 km] to the east)- Jump to our Gazetteer entry for Grinnell
- Grinnell is located in Poweshiek County
- Population from the 2020 Census: 9,096 people
- Jump to TripAdvisor's Tourism page for Grinnell <2>
- Newburg
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Newburg
- Newburg is located in Jasper County
- Metz
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Metz
- Metz is located in Jasper County
- Laurel
(13 miles [20.9 km] to the north) - Searsboro
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Searsboro
- Searsboro is located in Poweshiek County
- Population from the 2020 Census: 145 people
- Gilman
(14 miles [22.5 km] to the northeast) - Baxter
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Baxter
- Baxter is located in Jasper County
- Population from the 2020 Census: 1,132 people
- Jump to TripAdvisor's Tourism page for Baxter <2>
- Goddard
(14 miles [22.5 km] to the west)- Jump to our Gazetteer entry for Goddard
- Goddard is located in Jasper County
- Monroe
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Monroe
- Monroe is located in Jasper County
- Population from the 2020 Census: 1,905 people
- Jump to TripAdvisor's Tourism page for Monroe <2>
- Ira
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Ira
- Ira is located in Jasper County
- Otley
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Otley
- Otley is located in Marion County
- Jump to TripAdvisor's Tourism page for Otley <2>
- Taintor
(16 miles [25.7 km] to the southeast)- Jump to our Gazetteer entry for Taintor
- Taintor is located in Mahaska County
- Colfax
(16 miles [25.7 km] to the west)- Jump to our Gazetteer entry for Colfax
- Colfax is located in Jasper County
- Population from the 2020 Census: 2,050 people
- Jump to TripAdvisor's Tourism page for Colfax <2>
- Prairie City
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Prairie City
- Prairie City is located in Jasper County
- Population from the 2020 Census: 1,721 people
- Jump to TripAdvisor's Tourism page for Prairie City <2>
- Peoria
(17 miles [27.4 km] to the south)- Jump to our Gazetteer entry for Peoria
- Peoria is located in Mahaska County
- Ferguson
(17 miles [27.4 km] to the north) - Haverhill
(17 miles [27.4 km] to the north)- Note: The GPS coordinates that we are using for Haverhill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haverhill
- Haverhill is located in Marshall County
- Population from the 2020 Census: 168 people
- Jump to TripAdvisor's Tourism page for Haverhill <2>
- Green Castle
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Green Castle
- Green Castle is located in Jasper County
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pleasant View Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.6919, Longitude: -92.9213 In this case, the coordinates for the Pleasant View Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |