|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Linder Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Linder Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Linder Cemetery. We've listed the following communities based on their distance, with the closest first.
- Lambs Grove
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for Lambs Grove
- Lambs Grove is located in Jasper County
- Population from the 2020 Census: 165 people
- Newton
(4 miles [6.4 km] to the southeast)
- Goddard
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for Goddard
- Goddard is located in Jasper County
- Baxter
(5 miles [8 km] to the northwest)
- Ira
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Ira
- Ira is located in Jasper County
- Metz
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Metz
- Metz is located in Jasper County
- Green Castle
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Green Castle
- Green Castle is located in Jasper County
- Colfax
(9 miles [14.5 km] to the southwest)
- Mingo
(9 miles [14.5 km] to the west)
- Kellogg
(10 miles [16.1 km] to the east)
- Clyde
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Clyde. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clyde
- Clyde is located in Jasper County
- Oswalt
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Oswalt
- Oswalt is located in Jasper County
- Valeria
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Valeria have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valeria
- Valeria is located in Jasper County
- Population from the 2020 Census: 58 people
- Reasnor
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Reasnor
- Reasnor is located in Jasper County
- Population from the 2020 Census: 156 people
- Melbourne
(12 miles [19.3 km] to the north)
- Rhodes
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Rhodes have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rhodes
- Rhodes is located in Marshall County
- Population from the 2020 Census: 298 people
- Laurel
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Laurel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel
- Laurel is located in Marshall County
- Population from the 2020 Census: 234 people
- Prairie City
(13 miles [20.9 km] to the southwest)
- State Center Junction
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for State Center Junction have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for State Center Junction
- State Center Junction is located in Marshall County
- Santiago
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Santiago. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Santiago
- Santiago is located in Polk County
- Killduff
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Killduff
- Killduff is located in Jasper County
- Oakland Acres
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Oakland Acres have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakland Acres
- Oakland Acres is located in Jasper County
- Population from the 2020 Census: 161 people
- Haverhill
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Haverhill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haverhill
- Haverhill is located in Marshall County
- Population from the 2020 Census: 168 people
- Jump to TripAdvisor's Tourism page for Haverhill <2>
- Malta
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Malta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malta
- Malta is located in Marshall County
- Collins
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Collins
- Collins is located in Story County
- Population from the 2020 Census: 472 people
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Linder Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.7572, Longitude: -93.0966 In this case, the coordinates for the Linder Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|