|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the LaRue Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the LaRue Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the LaRue Cemetery. We've listed the following communities based on their distance, with the closest first.
- Keystone
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Keystone have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Keystone
- Keystone is located in Benton County
- Population from the 2020 Census: 615 people
- Jump to TripAdvisor's Tourism page for Keystone <3>
- Van Horne
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for Van Horne
- Van Horne is located in Benton County
- Population from the 2020 Census: 646 people
- Garrison
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Garrison have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garrison
- Garrison is located in Benton County
- Population from the 2020 Census: 355 people
- Elberon
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Elberon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elberon
- Elberon is located in Tama County
- Population from the 2020 Census: 188 people
- Jump to TripAdvisor's Tourism page for Elberon <3>
- Vinton
(9 miles [14.5 km] to the northeast)
- Irving
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Irving. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Irving
- Irving is located in Benton County
- Luzerne
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Luzerne
- Luzerne is located in Benton County
- Population from the 2020 Census: 92 people
- Blairstown
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Blairstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blairstown
- Blairstown is located in Benton County
- Population from the 2020 Census: 653 people
- Jump to TripAdvisor's Tourism page for Blairstown <3>
- Newhall
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Newhall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newhall
- Newhall is located in Benton County
- Population from the 2020 Census: 846 people
- Jump to TripAdvisor's Tourism page for Newhall <3>
- Dysart
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Dysart have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dysart
- Dysart is located in Tama County
- Population from the 2020 Census: 1,311 people
- Jump to TripAdvisor's Tourism page for Dysart <3>
- Belle Plaine
(12 miles [19.3 km] to the southwest)
- Benton City ‑ Historic
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Benton City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton City
- Benton City is located in Benton County
- Vining
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Vining
- Vining is located in Tama County
- Population from the 2020 Census: 49 people
- Clutier
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Clutier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clutier
- Clutier is located in Tama County
- Population from the 2020 Census: 203 people
- Jump to TripAdvisor's Tourism page for Clutier <3>
- Dayton
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Dayton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dayton
- Dayton is located in Iowa County
- Watkins
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Watkins
- Watkins is located in Benton County
- Shellsburg
(14 miles [22.5 km] to the east)
- Mount Auburn
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Mount Auburn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Auburn
- Mount Auburn is located in Benton County
- Population from the 2020 Census: 144 people
- Chelsea
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Chelsea have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chelsea
- Chelsea is located in Tama County
- Population from the 2020 Census: 246 people
- Jump to TripAdvisor's Tourism page for Chelsea <3>
- Norway
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Norway have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norway
- Norway is located in Benton County
- Population from the 2020 Census: 528 people
- Jump to TripAdvisor's Tourism page for Norway <3>
- Atkins
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Atkins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atkins
- Atkins is located in Benton County
- Population from the 2020 Census: 1,978 people
- Jump to TripAdvisor's Tourism page for Atkins <3>
- Palo
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Palo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palo
- Palo is located in Linn County
- Population from the 2020 Census: 1,075 people
- Jump to TripAdvisor's Tourism page for Palo <3>
- Urbana
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Urbana have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Urbana
- Urbana is located in Benton County
- Population from the 2020 Census: 1,498 people
- Jump to TripAdvisor's Tourism page for Urbana <3>
- La Porte City
(17 miles [27.4 km] to the north)
- Marengo
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Marengo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marengo
- Marengo is located in Iowa County
- Population from the 2020 Census: 2,466 people
- Jump to TripAdvisor's Tourism page for Marengo <3>
- Traer
(18 miles [29 km] to the northwest)
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the LaRue Cemetery. The point we use is located at these GPS coordinates - Latitude: 42.0575, Longitude: -92.1441 In this case, the coordinates for the LaRue Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|