|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hillside Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hillside Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hillside Cemetery. We've listed the following communities based on their distance, with the closest first.
- Doon
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Doon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doon
- Doon is located in Lyon County
- Population from the 2020 Census: 599 people
- Jump to TripAdvisor's Tourism page for Doon <3>
- Rock Valley
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Rock Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Valley
- Rock Valley is located in Sioux County
- Population from the 2020 Census: 3,901 people
- Jump to TripAdvisor's Tourism page for Rock Valley <3>
- Alvord
(5 miles [8 km] to the northwest)
- Perkins
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Perkins. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Perkins
- Perkins is located in Sioux County
- Hull
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Hull have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hull
- Hull is located in Sioux County
- Population from the 2020 Census: 2,296 people
- Jump to TripAdvisor's Tourism page for Hull <3>
- Inwood
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Inwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Inwood
- Inwood is located in Lyon County
- Population from the 2020 Census: 847 people
- Jump to TripAdvisor's Tourism page for Inwood <3>
- Edna
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Edna. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edna
- Edna is located in Lyon County
- Rock Rapids
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Rock Rapids have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Rapids
- Rock Rapids is located in Lyon County
- Population from the 2020 Census: 2,518 people
- Jump to TripAdvisor's Tourism page for Rock Rapids <3>
- Fairview
(12 miles [19.3 km] to the west)
- Lester
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Lester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lester
- Lester is located in Lyon County
- Population from the 2020 Census: 303 people
- Lebanon
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Sioux County
- Westbrook Village
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Westbrook Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westbrook Village
- Westbrook Village is located in Sioux County
- George
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for George have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for George
- George is located in Lyon County
- Population from the 2020 Census: 1,029 people
- Jump to TripAdvisor's Tourism page for George <3>
- Hudson
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Hudson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson
- Hudson is located in Lincoln County (SD)
- Population from the 2020 Census: 356 people
- Jump to TripAdvisor's Tourism page for Hudson <3>
- Sioux Center
(14 miles [22.5 km] to the south)
- Middleburg
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Middleburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Sioux County
- Boyden
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Boyden
- Boyden is located in Sioux County
- Population from the 2020 Census: 682 people
- Larchwood
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Larchwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larchwood
- Larchwood is located in Lyon County
- Population from the 2020 Census: 918 people
- Jump to TripAdvisor's Tourism page for Larchwood <3>
- Klondike
(15 miles [24.1 km] to the northwest)
- Jump to our Gazetteer entry for Klondike
- Klondike is located in Lyon County
- Beloit
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Beloit
- Beloit is located in Lyon County
- Steen
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Steen
- Steen is located in Rock County (MN)
- Population from the 2020 Census: 164 people
- Matlock
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Matlock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Matlock
- Matlock is located in Sioux County
- Population from the 2020 Census: 89 people
- Jump to TripAdvisor's Tourism page for Matlock <3>
- Canton
(16 miles [25.7 km] to the west)
- Hills
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hills
- Hills is located in Rock County (MN)
- Population from the 2020 Census: 647 people
- Jump to TripAdvisor's Tourism page for Hills <3>
- Ash Creek
(18 miles [29 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ash Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ash Creek
- Ash Creek is located in Rock County (MN)
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hillside Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.2728, Longitude: -96.2578 In this case, the coordinates for the Hillside Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|