RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Cedar County >> Fairview Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Iowa


The Commemorative Quarter for Iowa







Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Fairview Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Fairview Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Fairview Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Lowden
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lowden have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lowden
    • Lowden is located in Cedar County
    • Population from the 2020 Census: 761 people
    • Jump to TripAdvisor's Tourism page for Lowden <3>
  • Bennett
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Bennett have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bennett
    • Bennett is located in Cedar County
    • Population from the 2020 Census: 373 people
  • Clarence
    (6 miles [9.7 km] to the northwest)
  • Tipton
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Tipton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tipton
    • Tipton is located in Cedar County
    • Population from the 2020 Census: 3,178 people
    • Jump to TripAdvisor's Tourism page for Tipton <3>
  • Wheatland
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Wheatland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wheatland
    • Wheatland is located in Clinton County
    • Population from the 2020 Census: 724 people
  • New Liberty
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Liberty have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Liberty
    • New Liberty is located in Scott County
    • Population from the 2020 Census: 143 people
  • Big Rock
    (8 miles [12.9 km] to the east)
    • Jump to our Gazetteer entry for Big Rock
    • Big Rock is located in Scott County
  • Toronto
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for Toronto
    • Toronto is located in Clinton County
    • Population from the 2020 Census: 119 people
  • Sunbury
    (10 miles [16.1 km] to the south)
    • Jump to our Gazetteer entry for Sunbury
    • Sunbury is located in Cedar County
  • Oxford Mills
    (10 miles [16.1 km] to the north)
    • Jump to our Gazetteer entry for Oxford Mills
    • Oxford Mills is located in Jones County
  • Stanwood
    (10 miles [16.1 km] to the northwest)
  • Dixon
    (11 miles [17.7 km] to the southeast)
    • Jump to our Gazetteer entry for Dixon
    • Dixon is located in Scott County
    • Population from the 2020 Census: 249 people
  • Calamus
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Calamus have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Calamus
    • Calamus is located in Clinton County
    • Population from the 2020 Census: 397 people
  • Oxford Junction
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Oxford Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oxford Junction
    • Oxford Junction is located in Jones County
    • Population from the 2020 Census: 480 people
  • Lime City
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Lime City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lime City
    • Lime City is located in Cedar County
    • Former names for Lime City:
    • Lime Kilns
    • Munn
  • Buchanan
    (13 miles [20.9 km] to the west)
    • Jump to our Gazetteer entry for Buchanan
    • Buchanan is located in Cedar County
  • Rochester
    (13 miles [20.9 km] to the southwest)
    • Jump to our Gazetteer entry for Rochester
    • Rochester is located in Cedar County
  • Lost Nation
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lost Nation have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lost Nation
    • Lost Nation is located in Clinton County
    • Population from the 2020 Census: 403 people
    • Jump to TripAdvisor's Tourism page for Lost Nation <3>
  • Cedar Valley
    (14 miles [22.5 km] to the southwest)
    • Jump to our Gazetteer entry for Cedar Valley
    • Cedar Valley is located in Cedar County
  • Hale
    (14 miles [22.5 km] to the north)
    • Jump to our Gazetteer entry for Hale
    • Hale is located in Jones County
  • Olin
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Olin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Olin
    • Olin is located in Jones County
    • Population from the 2020 Census: 683 people
    • Jump to TripAdvisor's Tourism page for Olin <3>
  • Wilton
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilton
    • Wilton is located in Muscatine County
    • Population from the 2020 Census: 2,800 people
    • Jump to TripAdvisor's Tourism page for Wilton <3>
  • South Towne Park
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for South Towne Park have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Towne Park
    • South Towne Park is located in Muscatine County
  • Durant
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Durant have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Durant
    • Durant is located in Scott County
    • Population from the 2020 Census: 1,857 people
    • Jump to TripAdvisor's Tourism page for Durant <3>
  • Mechanicsville
    (15 miles [24.1 km] to the northwest)
    • Jump to our Gazetteer entry for Mechanicsville
    • Mechanicsville is located in Cedar County
    • Population from the 2020 Census: 1,116 people

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Fairview Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.8156, Longitude: -90.9865       In this case, the coordinates for the Fairview Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 09 Mar 2024