|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Elliott Parr Grave.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Elliott Parr Grave.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Elliott Parr Grave. We've listed the following cemeteries based on their distance, with the closest first.
- Lowden
(Less than 2 miles to the northeast)
- Note: The GPS coordinates that we are using for Lowden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowden
- Lowden is located in Cedar County
- Population from the 2020 Census: 761 people
- Jump to TripAdvisor's Tourism page for Lowden <3>
- Wheatland
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Wheatland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheatland
- Wheatland is located in Clinton County
- Population from the 2020 Census: 724 people
- Toronto
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Toronto
- Toronto is located in Clinton County
- Population from the 2020 Census: 119 people
- Clarence
(6 miles [9.7 km] to the northwest)
- Bennett
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Bennett have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bennett
- Bennett is located in Cedar County
- Population from the 2020 Census: 373 people
- Big Rock
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Big Rock
- Big Rock is located in Scott County
- Oxford Mills
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Oxford Mills
- Oxford Mills is located in Jones County
- New Liberty
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for New Liberty have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Liberty
- New Liberty is located in Scott County
- Population from the 2020 Census: 143 people
- Calamus
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Calamus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calamus
- Calamus is located in Clinton County
- Population from the 2020 Census: 397 people
- Oxford Junction
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Oxford Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oxford Junction
- Oxford Junction is located in Jones County
- Population from the 2020 Census: 480 people
- Tipton
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Tipton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tipton
- Tipton is located in Cedar County
- Population from the 2020 Census: 3,178 people
- Jump to TripAdvisor's Tourism page for Tipton <3>
- Dixon
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Dixon
- Dixon is located in Scott County
- Population from the 2020 Census: 249 people
- Lost Nation
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Lost Nation have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lost Nation
- Lost Nation is located in Clinton County
- Population from the 2020 Census: 403 people
- Jump to TripAdvisor's Tourism page for Lost Nation <3>
- Stanwood
(11 miles [17.7 km] to the west)
- Sunbury
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Sunbury
- Sunbury is located in Cedar County
- Hale
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Hale
- Hale is located in Jones County
- Bliedorn ‑ Historic
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Bliedorn. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bliedorn
- Bliedorn is located in Clinton County
- Elwood
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Elwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elwood
- Elwood is located in Clinton County
- Olin
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Olin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olin
- Olin is located in Jones County
- Population from the 2020 Census: 683 people
- Jump to TripAdvisor's Tourism page for Olin <3>
- Wyoming
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Wyoming have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyoming
- Wyoming is located in Jones County
- Population from the 2020 Census: 517 people
- Jump to TripAdvisor's Tourism page for Wyoming <3>
- Lime City
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Lime City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lime City
- Lime City is located in Cedar County
- Former names for Lime City:
- Lime Kilns
- Munn
- Grand Mound
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Grand Mound have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grand Mound
- Grand Mound is located in Clinton County
- Population from the 2020 Census: 591 people
- Jump to TripAdvisor's Tourism page for Grand Mound <3>
- Buchanan
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Buchanan
- Buchanan is located in Cedar County
- Rochester
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Rochester
- Rochester is located in Cedar County
- Durant
(16 miles [25.7 km] to the south)
- Hickory Grove
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Hickory Grove
- Hickory Grove is located in Scott County
- Baldwin
(16 miles [25.7 km] to the north)
- Monmouth
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Monmouth
- Monmouth is located in Jackson County
- Population from the 2020 Census: 154 people
- Mechanicsville
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Mechanicsville
- Mechanicsville is located in Cedar County
- Population from the 2020 Census: 1,116 people
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Elliott Parr Grave. The point we use is located at these GPS coordinates - Latitude: 41.8445, Longitude: -90.9460 In this case, the coordinates for the Elliott Parr Grave have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|