Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Burch Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Burch Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Burch Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Pleasantville
(4 miles [6.4 km] to the west)- Jump to our Gazetteer entry for Pleasantville
- Pleasantville is located in Marion County
- Population from the 2020 Census: 1,714 people
- Jump to TripAdvisor's Tourism page for Pleasantville <2>
- Knoxville
(6 miles [9.7 km] to the southeast)- Jump to our Gazetteer entry for Knoxville
- Knoxville is located in Marion County
- Population from the 2020 Census: 7,082 people
- Jump to TripAdvisor's Tourism page for Knoxville <2>
- Otley
(8 miles [12.9 km] to the northeast)- Jump to our Gazetteer entry for Otley
- Otley is located in Marion County
- Jump to TripAdvisor's Tourism page for Otley <2>
- Swan
(8 miles [12.9 km] to the northwest)- Jump to our Gazetteer entry for Swan
- Swan is located in Marion County
- Population from the 2020 Census: 74 people
- Monroe
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Monroe
- Monroe is located in Jasper County
- Population from the 2020 Census: 1,905 people
- Jump to TripAdvisor's Tourism page for Monroe <2>
- Sandyville
(10 miles [16.1 km] to the west)- Jump to our Gazetteer entry for Sandyville
- Sandyville is located in Warren County
- Population from the 2020 Census: 54 people
- Vandalia
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Vandalia
- Vandalia is located in Jasper County
- Melcher - Dallas
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Melcher - Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melcher - Dallas
- Melcher - Dallas is located in Marion County
- Population from the 2020 Census: 1,236 people
- Pershing
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Pershing
- Pershing is located in Marion County
- Runnells
(12 miles [19.3 km] to the northwest)- Jump to our Gazetteer entry for Runnells
- Runnells is located in Polk County
- Population from the 2020 Census: 498 people
- Jump to TripAdvisor's Tourism page for Runnells <2>
- Hartford
(12 miles [19.3 km] to the west)- Note: The GPS coordinates that we are using for Hartford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hartford
- Hartford is located in Warren County
- Population from the 2020 Census: 780 people
- Jump to TripAdvisor's Tourism page for Hartford <2>
- Pella
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Pella
- Pella is located in Marion County
- Population from the 2020 Census: 10,266 people
- Jump to TripAdvisor's Tourism page for Pella <2>
- Palmyra
(13 miles [20.9 km] to the west)- Jump to our Gazetteer entry for Palmyra
- Palmyra is located in Warren County
- Prairie City
(14 miles [22.5 km] to the north)- Jump to our Gazetteer entry for Prairie City
- Prairie City is located in Jasper County
- Population from the 2020 Census: 1,721 people
- Jump to TripAdvisor's Tourism page for Prairie City <2>
- Bauer
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Bauer
- Bauer is located in Marion County
- Attica
(14 miles [22.5 km] to the southeast)- Jump to our Gazetteer entry for Attica
- Attica is located in Marion County
- Harvey
(14 miles [22.5 km] to the east) - Reasnor
(14 miles [22.5 km] to the northeast) - Milo
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Milo
- Milo is located in Warren County
- Population from the 2020 Census: 760 people
- Jump to TripAdvisor's Tourism page for Milo <2>
- Columbia
(15 miles [24.1 km] to the south)- Jump to our Gazetteer entry for Columbia
- Columbia is located in Marion County
- Indiana
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Indiana
- Indiana is located in Marion County
- Ackworth
(15 miles [24.1 km] to the west) - Galesburg
(16 miles [25.7 km] to the northeast)- Jump to our Gazetteer entry for Galesburg
- Galesburg is located in Jasper County
- Adelphi
(16 miles [25.7 km] to the northwest) - Lacona
(17 miles [27.4 km] to the southwest)- Jump to our Gazetteer entry for Lacona
- Lacona is located in Warren County
- Population from the 2020 Census: 354 people
- Jump to TripAdvisor's Tourism page for Lacona <2>
- Newbern
(17 miles [27.4 km] to the southwest)- Jump to our Gazetteer entry for Newbern
- Newbern is located in Marion County
- Tracy
(17 miles [27.4 km] to the southeast) - Carlisle
(17 miles [27.4 km] to the northwest)- Jump to our Gazetteer entry for Carlisle
- Carlisle is located in Polk County
- Population from the 2020 Census: 4,323 people
- Jump to TripAdvisor's Tourism page for Carlisle <2>
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Burch Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.3967, Longitude: -93.1771 In this case, the coordinates for the Burch Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |