Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Bluffton had a population of 108 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Bluffton, with the one closest to Bluffton listed first.
- Burr Oak
(4 miles [6.4 km] to the northeast)
- Kendallville
(6 miles [9.7 km] to the west)
- Prosper
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Prosper have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prosper
- Prosper is located in Fillmore County (MN)
- Ridgeway
(8 miles [12.9 km] to the southwest)
- Springwater
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Springwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springwater
- Springwater is located in Winneshiek County
- Canton
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Canton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canton
- Canton is located in Fillmore County (MN)
- Population from the 2020 Census: 342 people
- Jump to TripAdvisor's Tourism page for Canton <2>
- Decorah
(9 miles [14.5 km] to the southeast)
- Locust
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust
- Locust is located in Winneshiek County
- Hesper
(9 miles [14.5 km] to the northeast)
- Cresco
(10 miles [16.1 km] to the west)
- Freeport
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Freeport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freeport
- Freeport is located in Winneshiek County
- Mabel
(10 miles [16.1 km] to the northeast)
- Harmony
(11 miles [17.7 km] to the northwest)
- Lenora
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Lenora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lenora
- Lenora is located in Fillmore County (MN)
- Conover
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Conover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conover
- Conover is located in Winneshiek County
- Highlandville
(12 miles [19.3 km] to the east)
- Newburg
(12 miles [19.3 km] to the northeast)
- Florenceville
(12 miles [19.3 km] to the northwest)
- Spillville
(13 miles [20.9 km] to the south)
- Nordness
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Nordness have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nordness
- Nordness is located in Winneshiek County
- Newhouse
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Newhouse have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newhouse
- Newhouse is located in Houston County (MN)
- Henrytown
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Henrytown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Henrytown
- Henrytown is located in Fillmore County (MN)
- Granger
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Granger. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Granger
- Granger is located in Fillmore County (MN)
- Google driving directions:
- From your current location to Granger
- From Bluffton to Granger
- Amherst
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Amherst have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Amherst
- Amherst is located in Fillmore County (MN)
- Bonair
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Bonair have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonair
- Bonair is located in Howard County
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bluffton, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |