Census Data for Ainsworth
Population ...
The most recent Census Estimate<1> was for 2019 and it gave Ainsworth a population of 579 people.
The last Decennial Census<2> was in 2010, which gave Ainsworth a population of 567 people.
The city of Ainsworth is located in Washington County. The 2010 Census gave Washington County; a population of 21,704 people. This means that Ainsworth had 2.61% of the county's total population, making it Washington's 6th most populous community.
At the same time, Iowa had a population of 3,046,355 people, meaning that Ainsworth had 0.02% of the total population of Iowa - making it the state's 422nd most populous community.
Area ...
The 2010 Census shows that the sampling area for Ainsworth has a total area of 0.38 square miles [1 km²].
Washington County has a land area of 568 square miles [1,473.3 km²]. At 0.38 square miles [1 km²], Ainsworth has 0.07% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a city like Ainsworth, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
- Things like population, area and housing for Ainsworth reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Ainsworth might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 41° 17' 24" (or 41.29°)
- Lon: -91° 33' 16" (or -91.55°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Ainsworth had 218 Housing Units<3> and with its population of 567 people, this averages 2.6 people per Housing Unit.
- Continue Reading ...
- The 2010 Census shows Ainsworth had a land area of 0.38 square miles [1 km²]. This translates to 581 Housing Units per square mile [224.5 housing units/km²].
- From the Census of 2000: Ainsworth had 208 Housing Units, a population of 524 people and a land area of 0.38 square miles [1 km²]. This gives a density of 2.52 people per Housing Unit and 548 Housing Units per square mile [211.7 housing units/km²].
- Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 and the 2000 Census, there were changes in the sampling area for Ainsworth and you need to be careful when comparing between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).
Washington County ...
The community of Ainsworth is located in Washington County<4>.
The county had a population of 21,704 people at the 2010 Census. With it's population of 567 people, Ainsworth represented 2.61% of the county's total.
In addition, where the city of Ainsworth has a population density of 1,512 people per square mile [583 people/km²], Washington County averages 38.16 people per square mile [14.73 people/km²].
For more information, please visit our Census Page for Washington County.
Census-to-Census Observations ...
Introduction ...
When the Census Bureau takes a census count (or enumeration) for Ainsworth, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Ainsworth. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for Ainsworth or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
Location ...
While generally coinciding with the GPS location (latitude/longitude) of Ainsworth, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Ainsworth.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 41.290091° (or 41°17'24" N)
- Lon: -91.554484° (or -91°33'16" W)
- For the 2000 Census, the location given was:
- Lat: 41.290175° (or 41°17'24" N)
- Lon: -91.554283° (or -91°33'15" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 63 feet to the southwest<5> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2393892) to Ainsworth. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Ainsworth. The GNIS point has been mapped to the latitude/longitude:
- Lat: 41.290090° (or 41°17'24" N)
- Lon: -91.554483° (or -91°33'16" W)
- The GPS location given for the 2010 Census lies 0.46 feet to the northwest<6> of the point given by the GNIS for Ainsworth. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Ainsworth.
Miscellaneous Information for Ainsworth ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Washington County or the city of Ainsworth:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 19 (Iowa)
- County Code: 183 (Washington County)
- Place Code: 00730 (Ainsworth)
- State & County Code: 19/183 (Iowa / Washington County)
- State & Place Code: 19/00730 (Iowa / Ainsworth)
- Misc. Census Codes ...
- Ainsworth is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
- The US Postal Service ZIP Code ...
- While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a city like Ainsworth, it does identify addresses that are in (or near) Ainsworth. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
- The ZIP code for Ainsworth:52201<7>
- Census ZCTA Codes ...
- The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
- ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.
For more information about the various Federal identification codes, please visit our Misc Page for Ainsworth.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Ainsworth. If you can help, please contact us through our Feedback Page.
The official website for State of Iowa: https://www.iowa.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019. |
| <2> | Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020. |
| <3> | A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway). |
| <4> | If you're interested in how the shape of Iowa's counties, including Washington, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <5> | The calculated bearing (or angle) to the 2010 Census location is 119 degrees and a distance of 63 feet. |
| <6> | The calculated bearing (or angle) to the GNIS point is 36 degrees and a distance of 0.46 feet. |
| <7> | When looking for a ZIP Code, whether Ainsworth or elsewhere, it's always best to check the website of the United States Postal Service (USPS). |