Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Wilbanks Corner in the Atlas, the following communities of the 1890's would have been found near the current location of Wilbanks Corner. The following communities are listed based on their distance, with the one closest to Wilbanks Corner listed first.
- Alto
(Less than 2 miles to the south)
- Longview
(Less than 2 miles to the south)
- Longview is located in Habersham County
- Jump to our Gazetteer entry for Longview
- Cornelia
(2 miles [3.2 km] to the northeast)
- Mount Airy
(4 miles [6.4 km] to the northeast)
- Heads Ferry
(4 miles [6.4 km] to the northwest)
- Heads Ferry is located in Habersham County
- Jump to our Gazetteer entry for Heads Ferry
- Hollingsworth
(5 miles [8 km] to the southeast)
- Hollingsworth is located in Banks County
- Jump to our Gazetteer entry for Hollingsworth
- Demorest
(5 miles [8 km] to the north)
- Mossy Creek
(7 miles [11.3 km] to the northwest)
- Mossy Creek is located in White County
- Jump to our Gazetteer entry for Mossy Creek
- Clarkesville
(8 miles [12.9 km] to the north)
- Lula
(9 miles [14.5 km] to the southwest)
- Bellton
(9 miles [14.5 km] to the southwest)
- Bellton is located in Banks County
- Jump to our Gazetteer entry for Bellton
- Centerside
(9 miles [14.5 km] to the west)
- Centerside is located in White County
- Jump to our Gazetteer entry for Centerside
- Glades
(10 miles [16.1 km] to the southwest)
- Glades is located in Hall County
- Jump to our Gazetteer entry for Glades
- Glades has also been known as:
- The Glades
- Anandale ‑ Historic
(10 miles [16.1 km] to the northeast)
- Anandale is located in Habersham County
- Jump to our Gazetteer entry for Anandale
- Leo
(10 miles [16.1 km] to the west)
- Leo is located in White County
- Jump to our Gazetteer entry for Leo
- Leo has also been known as:
- Meldean
- Homer
(11 miles [17.7 km] to the south)
- Aerial
(12 miles [19.3 km] to the north)
- Aerial is located in Habersham County
- Jump to our Gazetteer entry for Aerial
- Jewelville
(12 miles [19.3 km] to the southeast)
- Jewelville is located in Banks County
- Jump to our Gazetteer entry for Jewelville
- Gillsville
(13 miles [20.9 km] to the south)
- Cleveland
(13 miles [20.9 km] to the northwest)
- Land ‑ Historic
(14 miles [22.5 km] to the west)
- Land is located in Hall County
- Jump to our Gazetteer entry for Land
- White Sulphur Springs
(15 miles [24.1 km] to the southwest)
- Arp
(15 miles [24.1 km] to the southeast)
- Arp is located in Banks County
- Jump to our Gazetteer entry for Arp
- Nacoochee
(15 miles [24.1 km] to the northwest)
- Nacoochee is located in White County
- Jump to our Gazetteer entry for Nacoochee
- Turnerville
(15 miles [24.1 km] to the northeast)
- Tesnatee
(15 miles [24.1 km] to the west)
- Tesnatee is located in White County
- Jump to our Gazetteer entry for Tesnatee
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wilbanks Corner, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |