Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find West Bremen in the Atlas, the following communities of the 1890's would have been found near the current location of West Bremen. The following communities are listed based on their distance, with the one closest to West Bremen listed first.
- Bremen
(2 miles [3.2 km] to the south)- Jump to our Gazetteer entry for Bremen
- Bremen is located in Haralson County
- Population from the 2020 Census: 6,818 people
- Jump to TripAdvisor's Tourism page for Bremen <2>
- Waco
(4 miles [6.4 km] to the southwest)- Note: The GPS coordinates that we are using for Waco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waco
- Waco is located in Haralson County
- Population from the 2020 Census: 532 people
- Jump to TripAdvisor's Tourism page for Waco <2>
- Temple
(6 miles [9.7 km] to the east)- Jump to our Gazetteer entry for Temple
- Temple is located in Carroll County
- Population from the 2020 Census: 5,044 people
- Jump to TripAdvisor's Tourism page for Temple <2>
- Mandeville
(7 miles [11.3 km] to the south)- Note: The GPS coordinates that we are using for Mandeville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mandeville
- Mandeville is located in Carroll County
- Draketown
(7 miles [11.3 km] to the northeast) - Mount Zion
(8 miles [12.9 km] to the south)- Jump to our Gazetteer entry for Mount Zion
- Mount Zion is located in Carroll County
- Population from the 2020 Census: 1,888 people
- Jump to TripAdvisor's Tourism page for Mount Zion <2>
- Tallapoosa
(8 miles [12.9 km] to the west)- Jump to our Gazetteer entry for Tallapoosa
- Tallapoosa is located in Haralson County
- Population from the 2020 Census: 3,231 people
- Jump to TripAdvisor's Tourism page for Tallapoosa <2>
- Poplar Springs
(9 miles [14.5 km] to the northwest)- Note: The GPS coordinates that we are using for Poplar Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Springs
- Poplar Springs is located in Haralson County
- Plowshare ‑ Historic
(10 miles [16.1 km] to the south) - Shady Grove
(10 miles [16.1 km] to the southeast)- Note: The GPS coordinates that we are using for Shady Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shady Grove
- Shady Grove is located in Carroll County
- Felton
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Felton
- Felton is located in Haralson County
- Jump to TripAdvisor's Tourism page for Felton <2>
- Hooper
(10 miles [16.1 km] to the west) - Dugdown
(11 miles [17.7 km] to the northwest) - Burwell
(12 miles [19.3 km] to the south) - Carrollton
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Carrollton
- Carrollton is located in Carroll County
- Population from the 2020 Census: 27,450 people
- Jump to TripAdvisor's Tourism page for Carrollton <2>
- Sand Hill
(12 miles [19.3 km] to the southeast) - Youngs
(13 miles [20.9 km] to the north) - Villa Rica
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Villa Rica
- Villa Rica is located in Douglas County
- Population from the 2020 Census: 16,795 people
- Jump to TripAdvisor's Tourism page for Villa Rica <2>
- Little Creek
(13 miles [20.9 km] to the northwest)- Note: The GPS coordinates that we are using for Little Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Creek
- Little Creek is located in Haralson County
- Muscadine
(13 miles [20.9 km] to the west)- Jump to our Gazetteer entry for Muscadine
- Muscadine is located in Cleburne County (AL)
- Walthrall ‑ Historic
(14 miles [22.5 km] to the northwest) - Yorkville
(14 miles [22.5 km] to the northeast) - Hopewell
(15 miles [24.1 km] to the southwest) - Abernathy
(16 miles [25.7 km] to the southwest) - Bowdon
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Bowdon
- Bowdon is located in Carroll County
- Population from the 2020 Census: 2,089 people
- Jump to TripAdvisor's Tourism page for Bowdon <2>
- Cross Plains
(16 miles [25.7 km] to the southeast)- Note: The GPS coordinates that we are using for Cross Plains have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cross Plains
- Cross Plains is located in Carroll County
- Lang ‑ Historic
(16 miles [25.7 km] to the southeast) - Rollins
(16 miles [25.7 km] to the northeast) - Fish
(16 miles [25.7 km] to the north)
Off-the-Road Links ...
The official website for Haralson County: www.haralsoncountyga.org/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about West Bremen, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |