Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Tignall had a post office and no railroad service. In 2020, Tignall had a population of 493 people.
The following communities are listed based on their distance from Tignall, with the one closest to Tignall listed first.
- Bessie ‑ Historic
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Bessie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bessie
- Bessie is located in Wilkes County
- Danburg
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Danburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Danburg
- Danburg is located in Wilkes County
- Broad
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Broad have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broad
- Broad is located in Wilkes County
- Dyson ‑ Historic
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Dyson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dyson
- Dyson is located in Wilkes County
- Washington
(9 miles [14.5 km] to the south)
- Metasville
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Metasville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Metasville
- Metasville is located in Wilkes County
- Anon ‑ Historic
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Anon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anon
- Anon is located in Oglethorpe County
- Lina ‑ Historic
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Lina have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lina
- Lina is located in Wilkes County
- Vesta
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Vesta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vesta
- Vesta is located in Oglethorpe County
- Goshen
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Goshen
- Goshen is located in Lincoln County
- Little River
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Little River have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little River
- Little River is located in Wilkes County
- Stansell ‑ Historic
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Stansell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stansell
- Stansell is located in Elbert County
- Tyrone
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Tyrone
- Tyrone is located in Wilkes County
- Adasburg
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Adasburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Adasburg
- Adasburg is located in Wilkes County
- Lincolnton
(16 miles [25.7 km] to the east)
- Mount Carmel
(16 miles [25.7 km] to the northeast)
- Hester
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hester
- Hester is located in Abbeville County (SC)
- Middleton
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Middleton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleton
- Middleton is located in Elbert County
- Philomath
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Philomath have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philomath
- Philomath is located in Oglethorpe County
- Calhoun Falls
(17 miles [27.4 km] to the northeast)
- Heardmont
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Heardmont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heardmont
- Heardmont is located in Elbert County
- Point Peter
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Point Peter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Point Peter
- Point Peter is located in Oglethorpe County
- Hillman
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Hillman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillman
- Hillman is located in Taliaferro County
- Elberton
(18 miles [29 km] to the northwest)
- Lyneville
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Lyneville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyneville
- Lyneville is located in Taliaferro County
- Amity
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Amity have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Amity
- Amity is located in Lincoln County
- Agnes ‑ Historic
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Agnes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Agnes
- Agnes is located in Lincoln County
- Calhoun Mill
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Calhoun Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calhoun Mill
- Calhoun Mill is located in Abbeville County (SC)
- Oglesby
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Oglesby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oglesby
- Oglesby is located in Elbert County
- Sandy Cross
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Sandy Cross have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandy Cross
- Sandy Cross is located in Oglethorpe County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Tignall. If you can help, please contact us through our Feedback Page.
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tignall, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |