RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Monroe County >> Russellville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Georgia

The Commemorative Quarter for Georgia





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Russellville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Russellville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Russellville is located in Monroe County.

To see how the shape of Georgia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Monroe County: Bibb, Butts, Crawford, Jasper, Jones & Lamar.

Below are the counties that are near Russellville. For each of these counties, we show a sample of those communities that are closest to Russellville:

  • Monroe County     (The home county of Russellville)
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Culloden
      (6 miles [9.7 km] to the southwest)
    • Smarr
      (8 miles [12.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Smarr have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smarr
      • Smarr is located in Monroe County
      • Jump to TripAdvisor's Tourism page for Smarr <1>
    • Forsyth
      (9 miles [14.5 km] to the north)
    • Bolingbroke
      (11 miles [17.7 km] to the east)
    • Box Ankle
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Box Ankle
      • Box Ankle is located in Monroe County
    • Juliette
      (17 miles [27.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Juliette have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Juliette
      • Juliette is located in Monroe County
      • Estimated population in 2019: 161 people
      • Jump to TripAdvisor's Tourism page for Juliette <1>
  • Bibb County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Lizella
      (11 miles [17.7 km] to the southeast)
    • West Point
      (12 miles [19.3 km] to the southeast)
      • Jump to our Gazetteer entry for West Point
      • West Point is located in Bibb County
    • Brookhaven
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Brookhaven have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brookhaven
      • Brookhaven is located in Bibb County
      • Estimated population in 2019: 55,554 people
    • Bloomfield Park
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bloomfield Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bloomfield Park
      • Bloomfield Park is located in Bibb County
      • Estimated population in 2019: 2,686 people
    • Payne
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Payne
      • Payne is located in Bibb County
    • Vinson Village
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Vinson Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vinson Village
      • Vinson Village is located in Bibb County
    • Macon
      (20 miles [32.2 km] to the east)
    • Rutland
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rutland have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rutland
      • Rutland is located in Bibb County
      • Estimated population in 2019: 842 people
    • Cross Keys
      (23 miles [37 km] to the east)
      • Note: The GPS coordinates that we are using for Cross Keys have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cross Keys
      • Cross Keys is located in Bibb County
    • Walden
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Walden have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walden
      • Walden is located in Bibb County
      • Estimated population in 2019: 964 people
    • Mogul
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Mogul have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mogul
      • Mogul is located in Bibb County
      • Estimated population in 2019: 400 people
    • East Macon
      (25 miles [40.2 km] to the east)
      • Jump to our Gazetteer entry for East Macon
      • East Macon is located in Bibb County
  • Butts County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Flovilla
      (24 miles [38.6 km] to the north)
    • Jackson
      (27 miles [43.5 km] to the north)
    • Jenkinsburg
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Jenkinsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jenkinsburg
      • Jenkinsburg is located in Butts County
      • Population from the 2020 Census: 383 people
      • Jump to TripAdvisor's Tourism page for Jenkinsburg <1>
  • Crawford County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Musella
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Musella have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Musella
      • Musella is located in Crawford County
      • Jump to TripAdvisor's Tourism page for Musella <1>
    • Knoxville
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Knoxville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Knoxville
      • Knoxville is located in Crawford County
      • Jump to TripAdvisor's Tourism page for Knoxville <1>
    • Roberta
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Roberta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roberta
      • Roberta is located in Crawford County
      • Population from the 2020 Census: 950 people
      • Jump to TripAdvisor's Tourism page for Roberta <1>
    • Lee Pope
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Lee Pope have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lee Pope
      • Lee Pope is located in Crawford County
      • Estimated population in 2019: 3,055 people
    • Zenith
      (20 miles [32.2 km] to the south)
      • Jump to our Gazetteer entry for Zenith
      • Zenith is located in Crawford County
  • Houston County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Centerville
      (25 miles [40.2 km] to the southeast)
    • Elberta
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Elberta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elberta
      • Elberta is located in Houston County
      • Estimated population in 2019: 4,329 people
    • Warner Robins
      (29 miles [46.7 km] to the southeast)
  • Jasper County
  • Jones County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Belvedere Manor
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Belvedere Manor have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belvedere Manor
      • Belvedere Manor is located in Jones County
      • Population from the 2010 Census: 15,152 people
    • Wayside
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Wayside
      • Wayside is located in Jones County
    • Jones Acres
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Jones Acres have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jones Acres
      • Jones Acres is located in Jones County
      • Estimated population in 2019: 4,962 people
    • Clinton
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Clinton
      • Clinton is located in Jones County
      • Former name for Clinton:
      • Albany
    • Round Oak
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Round Oak
      • Round Oak is located in Jones County
    • Gray
      (27 miles [43.5 km] to the east)
      • Jump to our Gazetteer entry for Gray
      • Gray is located in Jones County
      • Population from the 2020 Census: 3,241 people
      • Jump to TripAdvisor's Tourism page for Gray <1>
    • Morton
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Morton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morton
      • Morton is located in Jones County
      • Estimated population in 2019: 549 people
    • Bradley
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Bradley
      • Bradley is located in Jones County
    • Pitts
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Pitts have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pitts
      • Pitts is located in Jones County
      • Estimated population in 2019: 293 people
    • Griswoldville ‑ Historic
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Griswoldville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Griswoldville
      • Griswoldville is located in Jones County
  • Lamar County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Goggins
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Goggins have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goggins
      • Goggins is located in Lamar County
      • Goggins has also been known as:
      • Goggans Station
      • Goggans
      • Goggansville
      • Goggins Station
      • Gogginsville
    • Aldora
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Aldora have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aldora
      • Aldora is located in Lamar County
      • Population from the 2020 Census: 111 people
    • Barnesville
      (14 miles [22.5 km] to the northwest)
    • Milner
      (18 miles [29 km] to the northwest)
    • Liberty Hill
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Liberty Hill
      • Liberty Hill is located in Lamar County
  • Macon County
    • Marshallville
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Marshallville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marshallville
      • Marshallville is located in Macon County
      • Population from the 2020 Census: 1,196 people
      • Jump to TripAdvisor's Tourism page for Marshallville <1>
  • Peach County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Taylors Mill
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Taylors Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Taylors Mill
      • Taylors Mill is located in Peach County
      • Estimated population in 2019: 224 people
    • Byron
      (22 miles [35.4 km] to the southeast)
    • Echeconnee
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Echeconnee
      • Echeconnee is located in Peach County
    • Fort Valley
      (24 miles [38.6 km] to the south)
    • Washington Square
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Washington Square have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Washington Square
      • Washington Square is located in Peach County
      • Estimated population in 2019: 3,963 people
    • Lakeview
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeview
      • Lakeview is located in Peach County
    • Miami Valley
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Miami Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Miami Valley
      • Miami Valley is located in Peach County
  • Pike County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Meansville
      (20 miles [32.2 km] to the northwest)
    • Zebulon
      (24 miles [38.6 km] to the northwest)
    • Williamson
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Williamson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamson
      • Williamson is located in Pike County
      • Population from the 2020 Census: 521 people
      • Jump to TripAdvisor's Tourism page for Williamson <1>
    • Concord
      (29 miles [46.7 km] to the northwest)
    • Hilltop
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hilltop have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hilltop
      • Hilltop is located in Pike County
    • Lawrences Mill
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Lawrences Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lawrences Mill
      • Lawrences Mill is located in Pike County
      • Estimated population in 2019: 30,834 people
    • Molena
      (30 miles [48.3 km] to the west)
      • Note: The GPS coordinates that we are using for Molena have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Molena
      • Molena is located in Pike County
      • Population from the 2020 Census: 399 people
      • Jump to TripAdvisor's Tourism page for Molena <1>
  • Spalding County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Orchard Hill
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Orchard Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orchard Hill
      • Orchard Hill is located in Spalding County
      • Population from the 2020 Census: 237 people
      • Jump to TripAdvisor's Tourism page for Orchard Hill <1>
    • East Griffin
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for East Griffin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Griffin
      • East Griffin is located in Spalding County
    • Griffin
      (28 miles [45.1 km] to the northwest)
    • Experiment
      (30 miles [48.3 km] to the northwest)
  • Talbot County
    • Prattsburg
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Prattsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prattsburg
      • Prattsburg is located in Talbot County
  • Taylor County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Carsonville
      (21 miles [33.8 km] to the southwest)
      • Jump to our Gazetteer entry for Carsonville
      • Carsonville is located in Taylor County
    • Five Points
      (21 miles [33.8 km] to the southwest)
      • Jump to our Gazetteer entry for Five Points
      • Five Points is located in Taylor County
    • Reynolds
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Reynolds have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Reynolds
      • Reynolds is located in Taylor County
      • Population from the 2020 Census: 953 people
      • Jump to TripAdvisor's Tourism page for Reynolds <1>
    • Butler
      (27 miles [43.5 km] to the southwest)
  • Twiggs County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Huber
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Huber
      • Huber is located in Twiggs County
    • Dry Branch
      (29 miles [46.7 km] to the east)
  • Upson County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Yatesville
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for Yatesville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Yatesville
      • Yatesville is located in Upson County
      • Population from the 2020 Census: 360 people
      • Jump to TripAdvisor's Tourism page for Yatesville <1>
    • Salem
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Salem
      • Salem is located in Upson County
    • The Rock
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for The Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for The Rock
      • The Rock is located in Upson County
      • Former name for The Rock:
      • Topeka Junction
      • Jump to TripAdvisor's Tourism page for The Rock <1>
    • Lincoln Park
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Lincoln Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lincoln Park
      • Lincoln Park is located in Upson County
      • Estimated population in 2019: 1,503 people
    • Thomaston
      (19 miles [30.6 km] to the west)
    • Hannahs Mill
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Hannahs Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hannahs Mill
      • Hannahs Mill is located in Upson County
    • Sunset Village
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Sunset Village
      • Sunset Village is located in Upson County
    • Barker Spring
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Barker Spring
      • Barker Spring is located in Upson County

For an expanded list of the communities that are closest to Russellville, see our County-by-County Page for Russellville.

Newspapers Published in Russellville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 19 newspapers that have been published in the area around Russellville.

Although we're unaware of any newspapers that were published in the immediate area of Russellville, there are papers which were published within 14 miles [22.5 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Russellville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Russellville:

Cemeteries Near Russellville ...

Below are cemeteries that are in the vicinity of Russellville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Russellville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Russellville, with the one closest to Russellville listed first.

  • Russellville Cemetery
    (Less than 2 miles to the southeast)
  • Wooten Family Cemetery
    (Less than 2 miles to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for the Wooten Family Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for the Wooten Family Cemetery
  • Bazemore Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Bazemore Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bazemore Cemetery
  • Mt. Vernon Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Mt. Vernon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Vernon Cemetery
  • Bird Cemetery
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Bird Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bird Cemetery
  • Jones Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Jones Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jones Cemetery
  • Anderson - Barnes - Bagley Cemetery
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for the Anderson - Barnes - Bagley Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Anderson - Barnes - Bagley Cemetery
  • Rogers Cemetery
    (3 miles [4.8 km] to the southeast)
  • McCommon Cemetery
    (4 miles [6.4 km] to the east)
  • McCough African-American Cemetery
    (4 miles [6.4 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for the McCough African-American Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for the McCough African-American Cemetery
  • Brent Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Brent Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Brent Cemetery
  • King Chapel Cemetery
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for the King Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the King Chapel Cemetery
  • Continue List   (427 more) ...
    • Person Cemetery
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for the Person Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Person Cemetery
    • Pierson Cemetery
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for the Pierson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Pierson Cemetery
    • Culloden City Cemetery
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Culloden City Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Culloden City Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Russellville had a population of 76 people in 1895 with a post office and no railroad service. In 1990, Russellville had a population of 871 people.

These communities are listed based on their distance from Russellville, with the one closest to Russellville listed first.

  • Bamah ‑ Historic
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Bamah have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bamah
    • Bamah is located in Monroe County
  • Strouds
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Strouds have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Strouds
    • Strouds is located in Monroe County
  • Brent
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Brent have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brent
    • Brent is located in Monroe County
  • Culloden
    (6 miles [9.7 km] to the southwest)
  • Ceres
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Ceres have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ceres
    • Ceres is located in Crawford County
  • Musella
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Musella have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Musella
    • Musella is located in Crawford County
    • Jump to TripAdvisor's Tourism page for Musella <1>
  • Montpelier ‑ Historic
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Montpelier have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montpelier
    • Montpelier is located in Bibb County
  • Yatesville
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Yatesville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Yatesville
    • Yatesville is located in Upson County
    • Population from the 2020 Census: 360 people
    • Jump to TripAdvisor's Tourism page for Yatesville <1>
  • Sandy Point
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Sandy Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandy Point
    • Sandy Point is located in Crawford County
  • Forsyth
    (9 miles [14.5 km] to the north)
  • Collier
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Collier have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Collier
    • Collier is located in Monroe County
  • Lizella
    (11 miles [17.7 km] to the southeast)
  • Continue List   (15 more) ...
    • Bolingbroke
      (11 miles [17.7 km] to the east)
    • Roberta
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Roberta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roberta
      • Roberta is located in Crawford County
      • Population from the 2020 Census: 950 people
      • Jump to TripAdvisor's Tourism page for Roberta <1>
    • Knoxville
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Knoxville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Knoxville
      • Knoxville is located in Crawford County
      • Jump to TripAdvisor's Tourism page for Knoxville <1>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Russellville. See our List of 1890's Communities around Russellville.

Unfortunately, we don't know of a website for Russellville. If you can help, please contact us through our Feedback Page.

The official website for Monroe County: www.monroecountygeorgia.com/

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Russellville) to Point B.Our distance measurements begin at a specific point in Russellville. The point we use is located at these GPS coordinates - Latitude: 32.9026, Longitude: -83.9913       In this case, the coordinates for Russellville have been provided by the Geographic Names Information System (GNIS).
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Russellville, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024