Census Data for Payne
As far as we can tell, The community of Payne has not been included in past Census counts, so there is no population information for this city.
While we don't have census information for Payne, you might be interested in some nearby communities where we do:
- Macon
(2 miles [3.2 km] to the southeast)
- Gray
(13 miles [20.9 km] to the northeast)
- Byron
(14 miles [22.5 km] to the south)
- Centerville
(15 miles [24.1 km] to the south)
- Warner Robins
(16 miles [25.7 km] to the south)
- Forsyth
(19 miles [30.6 km] to the northwest)
- Gordon
(20 miles [32.2 km] to the east)
- Roberta
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Roberta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roberta
- Roberta is located in Crawford County
- Jump to TripAdvisor's Tourism page for Roberta <1>
- Ivey
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Ivey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ivey
- Ivey is located in Wilkinson County
- Jeffersonville
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Jeffersonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jeffersonville
- Jeffersonville is located in Twiggs County
- Jump to TripAdvisor's Tourism page for Jeffersonville <1>
- Fort Valley
(23 miles [37 km] to the southwest)
- Culloden
(24 miles [38.6 km] to the west)
- Continue List (422 more) ...
- McIntyre
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for McIntyre have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIntyre
- McIntyre is located in Wilkinson County
- Jump to TripAdvisor's Tourism page for McIntyre <1>
- Perry
(27 miles [43.5 km] to the south)
- Yatesville
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Yatesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yatesville
- Yatesville is located in Upson County
- Jump to TripAdvisor's Tourism page for Yatesville <1>
Area ...
The 2010 Census shows that the sampling area for Payne has a total area of 0.04 square miles [0.1 km²].
Bibb County has a land area of 249.8 square miles [646.9 km²]. At 0.04 square miles [0.1 km²], Payne has 0.02% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a city like Payne, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
- Things like population, area and housing for Payne reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Payne might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 32° 51' 6" (or 32.85°)
- Lon: -83° 40' 45" (or -83.68°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Bibb County ...
Payne is located in Bibb County<3>.
For more information, please visit our Census Page for Bibb County.
Census-to-Census Observations ...
Introduction ...
When the Census Bureau takes a census count (or enumeration) for Payne, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Payne. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for Payne or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
Location ...
While generally coinciding with the GPS location (latitude/longitude) of Payne, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Payne.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 32.851838° (or 32°51'6" N)
- Lon: -83.679411° (or -83°40'45" W)
- For the 2000 Census, the location given was:
- Lat: 32.851888° (or 32°51'6" N)
- Lon: -83.679192° (or -83°40'45" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 69.5 feet to the west<4> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2404491) to Payne. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Payne. The GNIS point has been mapped to the latitude/longitude:
- Lat: 32.851832° (or 32°51'6" N)
- Lon: -83.679376° (or -83°40'45" W)
- The GPS location given for the 2010 Census lies 10.94 feet to the west<5> of the point given by the GNIS for Payne. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Payne.
Miscellaneous Information for Payne ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Bibb County or the city of Payne:
- The GNIS Codes ...
- The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Payne:
- GNIS ID for Payne: 2404491
- GNIS ID for Bibb County: 1672039
- GNIS ID for State of Georgia: 1705317
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 13 (Georgia)
- County Code: 021 (Bibb County)
- Place Code: 59584 (Payne)
- State & County Code: 13/021 (Georgia / Bibb County)
- State & Place Code: 13/59584 (Georgia / Payne)
- Misc. Census Codes ...
- Payne is located in Census Region #3 (the South Region) and Division #5 (the South Atlantic Division).
For more information about the various Federal identification codes, please visit our Misc Page for Payne.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Payne. If you can help, please contact us through our Feedback Page.
The official website for Bibb County: www.co.bibb.ga.us/
The official website for State of Georgia: https://georgia.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | If you're interested in how the shape of Georgia's counties, including Bibb, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<4> | The calculated bearing (or angle) to the 2010 Census location is 105 degrees and a distance of 69.5 feet. |
<5> | The calculated bearing (or angle) to the GNIS point is 78 degrees and a distance of 10.94 feet. |