Welcome to Lokchapee ...
Lokchapee is located in Bibb County<1>.
Lokchapee is 400 feet [122 m] above sea level.<2>.
Time Zone: Lokchapee lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Code for Lokchapee: 478
Communities near Lokchapee ...
We have created a list of 10 communities that are near Lokchapee.
- Warner Robins
(18 miles [29 km] to the south)
- Brookhaven
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Brookhaven have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brookhaven
- Brookhaven is located in Bibb County
- Estimated population in 2019: 55,554 people
- Belvedere Manor
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Belvedere Manor have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belvedere Manor
- Belvedere Manor is located in Jones County
- Population from the 2010 Census: 15,152 people
- Centerville
(17 miles [27.4 km] to the south)
- Byron
(16 miles [25.7 km] to the south)
- Jones Acres
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Jones Acres have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones Acres
- Jones Acres is located in Jones County
- Estimated population in 2019: 4,962 people
- Elberta
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Elberta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elberta
- Elberta is located in Houston County
- Estimated population in 2019: 4,329 people
- Forsyth
(17 miles [27.4 km] to the northwest)
- Gray
(13 miles [20.9 km] to the northeast)
- Bloomfield Park
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Bloomfield Park have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomfield Park
- Bloomfield Park is located in Bibb County
- Estimated population in 2019: 2,686 people
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Lokchapee. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Lokchapee.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Lokchapee. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Lokchapee.
We also have a detailed list of newspapers that have been published in the area around Lokchapee. See our Newspapers Page for Lokchapee.
TripAdvisor Tourism Pages for Lokchapee ...
Looking for more information about Lokchapee? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Lokchapee, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Lokchapee.
Footnotes ...
| <1> | If you're interested in how the shape of Georgia's counties, including Bibb, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Lokchapee - it will be higher in some places and lower in others. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |