Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Jones Mill in the Atlas, the following communities of the 1890's would have been found near the current location of Jones Mill. The following communities are listed based on their distance, with the one closest to Jones Mill listed first.
- Santaluca
(Less than 2 miles to the northeast)
- Santaluca is located in Gilmer County
- Jump to our Gazetteer entry for Santaluca
- White Path
(2 miles [3.2 km] to the southeast)
- White Path is located in Gilmer County
- Jump to our Gazetteer entry for White Path
- Estimated population in 2019: 342 people
- Flat Branch
(2 miles [3.2 km] to the west)
- Flat Branch is located in Gilmer County
- Jump to our Gazetteer entry for Flat Branch
- Cherry Log
(3 miles [4.8 km] to the east)
- Ellijay
(5 miles [8 km] to the south)
- Mountaintown
(6 miles [9.7 km] to the west)
- Mountaintown is located in Gilmer County
- Jump to our Gazetteer entry for Mountaintown
- Roy
(9 miles [14.5 km] to the southeast)
- Roy is located in Gilmer County
- Jump to our Gazetteer entry for Roy
- Blue Ridge
(9 miles [14.5 km] to the northeast)
- Cartecay
(10 miles [16.1 km] to the south)
- Cartecay is located in Gilmer County
- Jump to our Gazetteer entry for Cartecay
- Pisgah
(10 miles [16.1 km] to the east)
- Pisgah is located in Gilmer County
- Jump to our Gazetteer entry for Pisgah
- Tails Creek
(11 miles [17.7 km] to the southwest)
- Tails Creek is located in Gilmer County
- Jump to our Gazetteer entry for Tails Creek
- Population from the 2010 Census: 1,248 people
- Talona
(12 miles [19.3 km] to the south)
- Talona is located in Gilmer County
- Jump to our Gazetteer entry for Talona
- Tickanetley
(12 miles [19.3 km] to the southeast)
- Tickanetley is located in Gilmer County
- Jump to our Gazetteer entry for Tickanetley
- Newport
(12 miles [19.3 km] to the east)
- Newport is located in Fannin County
- Jump to our Gazetteer entry for Newport
- Curtis
(12 miles [19.3 km] to the northeast)
- Curtis is located in Fannin County
- Jump to our Gazetteer entry for Curtis
- Pierceville
(12 miles [19.3 km] to the north)
- Pierceville is located in Fannin County
- Jump to our Gazetteer entry for Pierceville
- Town Creek
(13 miles [20.9 km] to the south)
- Town Creek is located in Gilmer County
- Jump to our Gazetteer entry for Town Creek
- Morganton
(13 miles [20.9 km] to the northeast)
- Mineral Bluff
(13 miles [20.9 km] to the northeast)
- Hothouse
(13 miles [20.9 km] to the northeast)
- Hothouse is located in Fannin County
- Jump to our Gazetteer entry for Hothouse
- Kyle
(13 miles [20.9 km] to the north)
- Kyle is located in Fannin County
- Jump to our Gazetteer entry for Kyle
- Hasslers Mill
(14 miles [22.5 km] to the west)
- Hasslers Mill is located in Murray County
- Jump to our Gazetteer entry for Hasslers Mill
- Dennis
(15 miles [24.1 km] to the west)
- Dennis is located in Murray County
- Jump to our Gazetteer entry for Dennis
- Craytonia
(16 miles [25.7 km] to the east)
- Craytonia is located in Fannin County
- Jump to our Gazetteer entry for Craytonia
- Cutcane
(16 miles [25.7 km] to the northeast)
- Cutcane is located in Fannin County
- Jump to our Gazetteer entry for Cutcane
- Estimated population in 2019: 3,417 people
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jones Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |