TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Gillsville. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Gillsville.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Gillsville - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 51 communities listed:
- Alto
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Alto
- Alto is located in Habersham County
- Population from the 2020 Census: 1,207 people
- Jump to TripAdvisor's Tourism page for Alto <2>
- Google driving directions:
- From your current location to Alto
- From Gillsville to Alto
- Athens
(28 miles [45.1 km] to the southeast)- Jump to our Gazetteer entry for Athens
- Athens is located in Clarke County
- Jump to TripAdvisor's Tourism page for Athens <2>
- Google driving directions:
- From your current location to Athens
- From Gillsville to Athens
- Auburn
(23 miles [37 km] to the southwest)- Jump to our Gazetteer entry for Auburn
- Auburn is located in Barrow County
- Population from the 2020 Census: 7,902 people
- Jump to TripAdvisor's Tourism page for Auburn <2>
- Google driving directions:
- From your current location to Auburn
- From Gillsville to Auburn
- Baldwin
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for Baldwin
- Baldwin is located in Habersham County
- Population from the 2020 Census: 3,477 people
- Jump to TripAdvisor's Tourism page for Baldwin <2>
- Google driving directions:
- From your current location to Baldwin
- From Gillsville to Baldwin
- Bethlehem
(26 miles [41.8 km] to the south)- Jump to our Gazetteer entry for Bethlehem
- Bethlehem is located in Barrow County
- Population from the 2020 Census: 776 people
- Jump to TripAdvisor's Tourism page for Bethlehem <2>
- Google driving directions:
- From your current location to Bethlehem
- From Gillsville to Bethlehem
- Bogart
(25 miles [40.2 km] to the south)- Jump to our Gazetteer entry for Bogart
- Bogart is located in Oconee County
- Population from the 2020 Census: 1,203 people
- Jump to TripAdvisor's Tourism page for Bogart <2>
- Google driving directions:
- From your current location to Bogart
- From Gillsville to Bogart
- Braselton
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Braselton
- Braselton is located in Jackson County
- Population from the 2020 Census: 13,725 people
- Jump to TripAdvisor's Tourism page for Braselton <2>
- Google driving directions:
- From your current location to Braselton
- From Gillsville to Braselton
- Buford
(24 miles [38.6 km] to the southwest)- Jump to our Gazetteer entry for Buford
- Buford is located in Gwinnett County
- Population from the 2020 Census: 15,750 people
- Jump to TripAdvisor's Tourism page for Buford <2>
- Google driving directions:
- From your current location to Buford
- From Gillsville to Buford
- Canon
(29 miles [46.7 km] to the east)- Jump to our Gazetteer entry for Canon
- Canon is located in Franklin County
- Population from the 2020 Census: 786 people
- Jump to TripAdvisor's Tourism page for Canon <2>
- Google driving directions:
- From your current location to Canon
- From Gillsville to Canon
- Carnesville
(23 miles [37 km] to the east)- Jump to our Gazetteer entry for Carnesville
- Carnesville is located in Franklin County
- Population from the 2020 Census: 602 people
- Jump to TripAdvisor's Tourism page for Carnesville <2>
- Google driving directions:
- From your current location to Carnesville
- From Gillsville to Carnesville
- Chestnut Mountain
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Chestnut Mountain
- Chestnut Mountain is located in Hall County
- Jump to TripAdvisor's Tourism page for Chestnut Mountain <2>
- Google driving directions:
- From your current location to Chestnut Mountain
- From Gillsville to Chestnut Mountain
- Clarkesville
(22 miles [35.4 km] to the north)- Jump to our Gazetteer entry for Clarkesville
- Clarkesville is located in Habersham County
- Population from the 2020 Census: 1,843 people
- Jump to TripAdvisor's Tourism page for Clarkesville <2>
- Google driving directions:
- From your current location to Clarkesville
- From Gillsville to Clarkesville
- Clermont
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Clermont
- Clermont is located in Hall County
- Population from the 2020 Census: 1,099 people
- Jump to TripAdvisor's Tourism page for Clermont <2>
- Google driving directions:
- From your current location to Clermont
- From Gillsville to Clermont
- Cleveland
(21 miles [33.8 km] to the north)- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in White County
- Population from the 2020 Census: 4,167 people
- Jump to TripAdvisor's Tourism page for Cleveland <2>
- Google driving directions:
- From your current location to Cleveland
- From Gillsville to Cleveland
- Colbert
(30 miles [48.3 km] to the southeast)- Jump to our Gazetteer entry for Colbert
- Colbert is located in Madison County
- Population from the 2020 Census: 596 people
- Jump to TripAdvisor's Tourism page for Colbert <2>
- Google driving directions:
- From your current location to Colbert
- From Gillsville to Colbert
- Commerce
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Commerce
- Commerce is located in Jackson County
- Population from the 2020 Census: 7,328 people
- Jump to TripAdvisor's Tourism page for Commerce <2>
- Google driving directions:
- From your current location to Commerce
- From Gillsville to Commerce
- Cornelia
(15 miles [24.1 km] to the northeast)- Jump to our Gazetteer entry for Cornelia
- Cornelia is located in Habersham County
- Population from the 2020 Census: 4,799 people
- Jump to TripAdvisor's Tourism page for Cornelia <2>
- Google driving directions:
- From your current location to Cornelia
- From Gillsville to Cornelia
- Cumming
(29 miles [46.7 km] to the west)- Jump to our Gazetteer entry for Cumming
- Cumming is located in Forsyth County
- Population from the 2020 Census: 6,639 people
- Jump to TripAdvisor's Tourism page for Cumming <2>
- Google driving directions:
- From your current location to Cumming
- From Gillsville to Cumming
- Dacula
(26 miles [41.8 km] to the southwest)- Jump to our Gazetteer entry for Dacula
- Dacula is located in Gwinnett County
- Population from the 2020 Census: 6,477 people
- Jump to TripAdvisor's Tourism page for Dacula <2>
- Google driving directions:
- From your current location to Dacula
- From Gillsville to Dacula
- Dahlonega
(25 miles [40.2 km] to the northwest)- Jump to our Gazetteer entry for Dahlonega
- Dahlonega is located in Lumpkin County
- Population from the 2020 Census: 7,329 people
- Jump to TripAdvisor's Tourism page for Dahlonega <2>
- Google driving directions:
- From your current location to Dahlonega
- From Gillsville to Dahlonega
- Danielsville
(26 miles [41.8 km] to the southeast)- Jump to our Gazetteer entry for Danielsville
- Danielsville is located in Madison County
- Population from the 2020 Census: 601 people
- Jump to TripAdvisor's Tourism page for Danielsville <2>
- Google driving directions:
- From your current location to Danielsville
- From Gillsville to Danielsville
- Dawsonville
(28 miles [45.1 km] to the west)- Jump to our Gazetteer entry for Dawsonville
- Dawsonville is located in Dawson County
- Population from the 2020 Census: 3,465 people
- Jump to TripAdvisor's Tourism page for Dawsonville <2>
- Google driving directions:
- From your current location to Dawsonville
- From Gillsville to Dawsonville
- Demorest
(18 miles [29 km] to the north)- Jump to our Gazetteer entry for Demorest
- Demorest is located in Habersham County
- Population from the 2020 Census: 2,143 people
- Jump to TripAdvisor's Tourism page for Demorest <2>
- Google driving directions:
- From your current location to Demorest
- From Gillsville to Demorest
- Eastanollee
(26 miles [41.8 km] to the northeast)- Jump to our Gazetteer entry for Eastanollee
- Eastanollee is located in Stephens County
- Jump to TripAdvisor's Tourism page for Eastanollee <2>
- Google driving directions:
- From your current location to Eastanollee
- From Gillsville to Eastanollee
- Flowery Branch
(18 miles [29 km] to the southwest)- Jump to our Gazetteer entry for Flowery Branch
- Flowery Branch is located in Hall County
- Population from the 2020 Census: 8,778 people
- Jump to TripAdvisor's Tourism page for Flowery Branch <2>
- Google driving directions:
- From your current location to Flowery Branch
- From Gillsville to Flowery Branch
- Franklin Springs
(27 miles [43.5 km] to the east)- Jump to our Gazetteer entry for Franklin Springs
- Franklin Springs is located in Franklin County
- Population from the 2020 Census: 1,187 people
- Jump to TripAdvisor's Tourism page for Franklin Springs <2>
- Google driving directions:
- From your current location to Franklin Springs
- From Gillsville to Franklin Springs
- Gainesville
(10 miles [16.1 km] to the west)- Jump to our Gazetteer entry for Gainesville
- Gainesville is located in Hall County
- Population from the 2020 Census: 44,213 people
- Jump to TripAdvisor's Tourism page for Gainesville <2>
- Google driving directions:
- From your current location to Gainesville
- From Gillsville to Gainesville
- Helen
(27 miles [43.5 km] to the north)- Jump to our Gazetteer entry for Helen
- Helen is located in White County
- Population from the 2020 Census: 559 people
- Jump to TripAdvisor's Tourism page for Helen <2>
- Google driving directions:
- From your current location to Helen
- From Gillsville to Helen
- Homer
(7 miles [11.3 km] to the east)- Jump to our Gazetteer entry for Homer
- Homer is located in Banks County
- Population from the 2020 Census: 1,257 people
- Jump to TripAdvisor's Tourism page for Homer <2>
- Google driving directions:
- From your current location to Homer
- From Gillsville to Homer
- Hoschton
(16 miles [25.7 km] to the southwest)- Jump to our Gazetteer entry for Hoschton
- Hoschton is located in Jackson County
- Population from the 2020 Census: 2,485 people
- Jump to TripAdvisor's Tourism page for Hoschton <2>
- Google driving directions:
- From your current location to Hoschton
- From Gillsville to Hoschton
- Hull
(28 miles [45.1 km] to the southeast)- Jump to our Gazetteer entry for Hull
- Hull is located in Madison County
- Population from the 2020 Census: 222 people
- Jump to TripAdvisor's Tourism page for Hull <2>
- Google driving directions:
- From your current location to Hull
- From Gillsville to Hull
- Ila
(21 miles [33.8 km] to the southeast)- Jump to our Gazetteer entry for Ila
- Ila is located in Madison County
- Population from the 2020 Census: 359 people
- Jump to TripAdvisor's Tourism page for Ila <2>
- Google driving directions:
- From your current location to Ila
- From Gillsville to Ila
- Jefferson
(13 miles [20.9 km] to the south)- Jump to our Gazetteer entry for Jefferson
- Jefferson is located in Jackson County
- Population from the 2020 Census: 12,490 people
- Jump to TripAdvisor's Tourism page for Jefferson <2>
- Google driving directions:
- From your current location to Jefferson
- From Gillsville to Jefferson
- Lula
(5 miles [8 km] to the north)- Jump to our Gazetteer entry for Lula
- Lula is located in Hall County
- Population from the 2020 Census: 3,016 people
- Jump to TripAdvisor's Tourism page for Lula <2>
- Google driving directions:
- From your current location to Lula
- From Gillsville to Lula
- Martin
(28 miles [45.1 km] to the northeast)- Jump to our Gazetteer entry for Martin
- Martin is located in Stephens County
- Population from the 2020 Census: 376 people
- Jump to TripAdvisor's Tourism page for Martin <2>
- Google driving directions:
- From your current location to Martin
- From Gillsville to Martin
- Maysville
(5 miles [8 km] to the southeast)- Jump to our Gazetteer entry for Maysville
- Maysville is located in Banks County
- Population from the 2020 Census: 2,175 people
- Jump to TripAdvisor's Tourism page for Maysville <2>
- Google driving directions:
- From your current location to Maysville
- From Gillsville to Maysville
- Mount Airy
(16 miles [25.7 km] to the northeast)- Jump to our Gazetteer entry for Mount Airy
- Mount Airy is located in Habersham County
- Population from the 2020 Census: 1,280 people
- Jump to TripAdvisor's Tourism page for Mount Airy <2>
- Google driving directions:
- From your current location to Mount Airy
- From Gillsville to Mount Airy
- Murrayville
(17 miles [27.4 km] to the northwest)- Note: The GPS coordinates that we are using for Murrayville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murrayville
- Murrayville is located in Hall County
- Jump to TripAdvisor's Tourism page for Murrayville <2>
- Nicholson
(17 miles [27.4 km] to the southeast)- Note: The GPS coordinates that we are using for Nicholson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Jackson County
- Population from the 2020 Census: 1,909 people
- Jump to TripAdvisor's Tourism page for Nicholson <2>
- Oakwood
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Oakwood
- Oakwood is located in Hall County
- Population from the 2020 Census: 4,305 people
- Jump to TripAdvisor's Tourism page for Oakwood <2>
- Google driving directions:
- From your current location to Oakwood
- From Gillsville to Oakwood
- Pendergrass
(10 miles [16.1 km] to the south)- Note: The GPS coordinates that we are using for Pendergrass have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendergrass
- Pendergrass is located in Jackson County
- Population from the 2020 Census: 577 people
- Jump to TripAdvisor's Tourism page for Pendergrass <2>
- Royston
(29 miles [46.7 km] to the east)- Jump to our Gazetteer entry for Royston
- Royston is located in Franklin County
- Population from the 2020 Census: 2,562 people
- Jump to TripAdvisor's Tourism page for Royston <2>
- Google driving directions:
- From your current location to Royston
- From Gillsville to Royston
- Sautee - Nacoochee
(26 miles [41.8 km] to the north)- Jump to our Gazetteer entry for Sautee - Nacoochee
- Sautee - Nacoochee is located in White County
- Sautee - Nacoochee has also been known as:
- Sautee
- Jump to TripAdvisor's Tourism page for Sautee - Nacoochee <2>
- Google driving directions:
- From your current location to Sautee - Nacoochee
- From Gillsville to Sautee - Nacoochee
- Statham
(23 miles [37 km] to the south)- Note: The GPS coordinates that we are using for Statham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statham
- Statham is located in Barrow County
- Population from the 2020 Census: 2,880 people
- Jump to TripAdvisor's Tourism page for Statham <2>
- Sugar Hill
(26 miles [41.8 km] to the southwest)- Jump to our Gazetteer entry for Sugar Hill
- Sugar Hill is located in Gwinnett County
- Population from the 2020 Census: 25,132 people
- Jump to TripAdvisor's Tourism page for Sugar Hill <2>
- Google driving directions:
- From your current location to Sugar Hill
- From Gillsville to Sugar Hill
- Suwanee
(30 miles [48.3 km] to the southwest)- Note: The GPS coordinates that we are using for Suwanee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Suwanee
- Suwanee is located in Gwinnett County
- Population from the 2020 Census: 21,803 people
- Jump to TripAdvisor's Tourism page for Suwanee <2>
- Talmo
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Talmo
- Talmo is located in Jackson County
- Population from the 2020 Census: 263 people
- Jump to TripAdvisor's Tourism page for Talmo <2>
- Google driving directions:
- From your current location to Talmo
- From Gillsville to Talmo
- Toccoa Falls
(25 miles [40.2 km] to the northeast)- Note: The GPS coordinates that we are using for Toccoa Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toccoa Falls
- Toccoa Falls is located in Stephens County
- Jump to TripAdvisor's Tourism page for Toccoa Falls <2>
- Toccoa
(25 miles [40.2 km] to the northeast)- Jump to our Gazetteer entry for Toccoa
- Toccoa is located in Stephens County
- Population from the 2020 Census: 8,300 people
- Jump to TripAdvisor's Tourism page for Toccoa <2>
- Google driving directions:
- From your current location to Toccoa
- From Gillsville to Toccoa
- Turnerville
(28 miles [45.1 km] to the northeast)- Note: The GPS coordinates that we are using for Turnerville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turnerville
- Turnerville is located in Habersham County
- Jump to TripAdvisor's Tourism page for Turnerville <2>
- Winder
(22 miles [35.4 km] to the south)- Jump to our Gazetteer entry for Winder
- Winder is located in Barrow County
- Population from the 2020 Census: 18,273 people
- Jump to TripAdvisor's Tourism page for Winder <2>
- Google driving directions:
- From your current location to Winder
- From Gillsville to Winder
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Gillsville. If you can help, please contact us through our Feedback Page.
The official website for Hall County: www.hallcounty.org/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Gillsville) to Point B.Our distance measurements begin at a specific point in Gillsville. The point we use is located at these GPS coordinates - Latitude: 34.3077, Longitude: -83.6336 |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |