Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Donovan in the Atlas, the following communities of the 1890's would have been found near the current location of Donovan. The following communities are listed based on their distance, with the one closest to Donovan listed first.
- Wrightsville
(2 miles [3.2 km] to the south)
- Harrison
(3 miles [4.8 km] to the north)
- Pringle
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Pringle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pringle
- Pringle is located in Washington County
- Spann
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Spann have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spann
- Spann is located in Johnson County
- Lovett
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Lovett
- Lovett is located in Laurens County
- Riddleville
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Riddleville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riddleville
- Riddleville is located in Washington County
- Population from the 2020 Census: 86 people
- Kite
(12 miles [19.3 km] to the southeast)
- Tennille
(12 miles [19.3 km] to the northwest)
- Sun Hill
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Sun Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sun Hill
- Sun Hill is located in Washington County
- Sandersville
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Sandersville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandersville
- Sandersville is located in Washington County
- Population from the 2020 Census: 5,275 people
- Jump to TripAdvisor's Tourism page for Sandersville <2>
- Pinetucky ‑ Historic
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Pinetucky have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinetucky
- Pinetucky is located in Jefferson County
- Bartow
(15 miles [24.1 km] to the northeast)
- Oconee
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Oconee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oconee
- Oconee is located in Washington County
- Population from the 2020 Census: 240 people
- Jump to TripAdvisor's Tourism page for Oconee <2>
- Condor
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Condor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Condor
- Condor is located in Laurens County
- Beech Hill
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Beech Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Hill
- Beech Hill is located in Wilkinson County
- Adrian
(18 miles [29 km] to the southeast)
- Dublin
(19 miles [30.6 km] to the southwest)
- Wadley
(19 miles [30.6 km] to the east)
- Downs
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Downs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Downs
- Downs is located in Washington County
- Moxley
(21 miles [33.8 km] to the northeast)
- Jump to our Gazetteer entry for Moxley
- Moxley is located in Jefferson County
- Hebron
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Hebron have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hebron
- Hebron is located in Washington County
- Toomsboro
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Toomsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toomsboro
- Toomsboro is located in Wilkinson County
- Population from the 2020 Census: 478 people
- Jump to TripAdvisor's Tourism page for Toomsboro <2>
- Deepstep
(22 miles [35.4 km] to the northwest)
- Warthen
(23 miles [37 km] to the north)
- Tweed
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Tweed have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tweed
- Tweed is located in Laurens County
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Donovan, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |