Around Crossroads ...
The following is a sample of nearby communities based on their distance from Crossroads, with the nearest first.
- Hatcher
(Less than 2 miles to the southwest) - Morris
(3 miles [4.8 km] to the southeast)- Note: The GPS coordinates that we are using for Morris have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morris
- Morris is located in Quitman County
- Jump to TripAdvisor's Tourism page for Morris <3>
- Georgetown
(7 miles [11.3 km] to the northwest)- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Quitman County
- Eufaula
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Eufaula
- Eufaula is located in Barbour County (AL)
- Population from the 2020 Census: 11,621 people
- Jump to TripAdvisor's Tourism page for Eufaula <3>
- Coleman
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Coleman
- Coleman is located in Randolph County
- Jump to TripAdvisor's Tourism page for Coleman <3>
- Cuthbert
(12 miles [19.3 km] to the east)- Jump to our Gazetteer entry for Cuthbert
- Cuthbert is located in Randolph County
- Population from the 2020 Census: 3,361 people
- Jump to TripAdvisor's Tourism page for Cuthbert <3>
- Screamer
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Screamer
- Screamer is located in Henry County (AL)
- Fort Gaines
(15 miles [24.1 km] to the south)- Jump to our Gazetteer entry for Fort Gaines
- Fort Gaines is located in Clay County
- Population from the 2020 Census: 973 people
- Jump to TripAdvisor's Tourism page for Fort Gaines <3>
- Cotton Hill
(16 miles [25.7 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Cotton Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cotton Hill
- Cotton Hill is located in Barbour County (AL)
- Continue List (6 more) ...
- Bellville
(17 miles [27.4 km] to the south)- Jump to our Gazetteer entry for Bellville
- Bellville is located in Clay County
- Estimated population in 2019: 118 people
- Florence
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Florence
- Florence is located in Stewart County
- Bakerhill
(18 miles [29 km] to the west)- Jump to our Gazetteer entry for Bakerhill
- Bakerhill is located in Barbour County (AL)
- Population from the 2020 Census: 229 people
- Lumpkin
(18 miles [29 km] to the northeast)- Jump to our Gazetteer entry for Lumpkin
- Lumpkin is located in Stewart County
- Population from the 2020 Census: 1,280 people
- Jump to TripAdvisor's Tourism page for Lumpkin <3>
- Hawkinsville
(19 miles [30.6 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Hawkinsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hawkinsville
- Hawkinsville is located in Barbour County (AL)
- Shorterville
(19 miles [30.6 km] to the south)- Note: The GPS coordinates that we are using for Shorterville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shorterville
- Shorterville is located in Henry County (AL)
- Bellville
For more communities neighboring Crossroads, please visit our County-by-County Page for Crossroads.
Quitman County ...
Crossroads is located in Quitman County<4>.
The following counties adjoin and form the boundaries of Quitman County: Barbour (AL), Clay, Randolph & Stewart.
Curious and Interesting Names Near Crossroads ...
It seems like there is always a nearby community with a name that seems interesting, maybe familiar or just catches our attention in some other way. We've collected some names which strike us as being curious or interesting. Our list can be found on the Tidbits & Trivia Page for Crossroads.
Airports Near Crossroads ...
When a trip includes a flight, we try to find an airport that best fits our travel plans.<5> To that purpose, we've assembled a list of that are relatively close to Crossroads and that information can be found on the Airports Page for Crossroads.
Websites We Enjoy ...
When we're planning a trip, we like to check the following websites for sights, attractions and places to visit.
- For the State of Georgia:
- TripAdvisor Links for:
- Also of Interest:
Off-the-Road Links ...
Unfortunately, we don't know of a website for Crossroads. If you can help, please contact us through our Feedback Page.
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | If you're interested in how the shape of Georgia's counties, including Quitman, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <5> | When we are planning a trip (for example, to Crossroads), we usually look for the obvious: the choice of airlines that fly into the airport, the number of flights, the connections we have to make, which car rentals are available, etc. We also look for sights and attractions that we might find between any given airport and our destination - we do love exploring. We're willing to fly into a more distant airport if we can get the services and amenities that we like. Even though our choice of airport might be inconvenient to others, it usually gives us a better trip. |