|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Ware Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Ware Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Ware Cemetery. We've listed the following communities based on their distance, with the closest first.
- Woodbury
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Woodbury have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodbury
- Woodbury is located in Meriwether County
- Population from the 2020 Census: 898 people
- Jump to TripAdvisor's Tourism page for Woodbury <3>
- Edman
(4 miles [6.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Edman. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edman
- Edman is located in Meriwether County
- Harris City
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Harris City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harris City
- Harris City is located in Meriwether County
- Greenville
(5 miles [8 km] to the northwest)
- Bullochville ‑ Historic
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bullochville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bullochville
- Bullochville is located in Meriwether County
- Warm Springs
(7 miles [11.3 km] to the southwest)
- Molena
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Molena have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Molena
- Molena is located in Pike County
- Population from the 2020 Census: 399 people
- Jump to TripAdvisor's Tourism page for Molena <3>
- Gay
(7 miles [11.3 km] to the north)
- Manchester
(9 miles [14.5 km] to the south)
- Chalybeate Springs
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Chalybeate Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Chalybeate Springs
- Chalybeate Springs is located in Meriwether County
- Flint Hill
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Flint Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Flint Hill
- Flint Hill is located in Talbot County
- Barker Spring
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Barker Spring
- Barker Spring is located in Upson County
- Rocky Mount
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Rocky Mount
- Rocky Mount is located in Meriwether County
- Concord
(12 miles [19.3 km] to the northeast)
- Shiloh
(13 miles [20.9 km] to the south)
- Hilltop
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Hilltop have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hilltop
- Hilltop is located in Pike County
- Woodland
(14 miles [22.5 km] to the south)
- Sunset Village
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Sunset Village
- Sunset Village is located in Upson County
- Belleview
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Belleview. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Belleview
- Belleview is located in Talbot County
- Mountville
(15 miles [24.1 km] to the west)
- Pine Mountain
(16 miles [25.7 km] to the southwest)
- Hannahs Mill
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Hannahs Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hannahs Mill
- Hannahs Mill is located in Upson County
- Luthersville
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Luthersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luthersville
- Luthersville is located in Meriwether County
- Population from the 2020 Census: 831 people
- Jump to TripAdvisor's Tourism page for Luthersville <3>
- Haralson
(16 miles [25.7 km] to the north)
- Lone Oak
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Lone Oak
- Lone Oak is located in Meriwether County
- Population from the 2020 Census: 89 people
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Ware Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.9896, Longitude: -84.6216 In this case, the coordinates for the Ware Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|