RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Johnson County >> Townsend - Gunn Cemetery >> Nearby CommunitiesIndex...

Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Townsend - Gunn Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Townsend - Gunn Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Townsend - Gunn Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Kite
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for Kite
    • Kite is located in Johnson County
    • Population from the 2020 Census: 226 people
    • Jump to TripAdvisor's Tourism page for Kite <2>
  • Blundale
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for Blundale
    • Blundale is located in Emanuel County
  • Swainsboro
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Swainsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swainsboro
    • Swainsboro is located in Emanuel County
    • Population from the 2020 Census: 7,491 people
    • Jump to TripAdvisor's Tourism page for Swainsboro <2>
  • Adrian
    (10 miles [16.1 km] to the southwest)
  • Norristown
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Norristown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norristown
    • Norristown is located in Emanuel County
    • Jump to TripAdvisor's Tourism page for Norristown <2>
  • Blun
    (11 miles [17.7 km] to the east)
    • Jump to our Gazetteer entry for Blun
    • Blun is located in Emanuel County
  • Gillis Springs
    (13 miles [20.9 km] to the south)
    • Jump to our Gazetteer entry for Gillis Springs
    • Gillis Springs is located in Treutlen County
  • Nunez
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Nunez have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nunez
    • Nunez is located in Emanuel County
    • Population from the 2020 Census: 141 people
    • Jump to TripAdvisor's Tourism page for Nunez <2>
  • Summertown
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Summertown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Summertown
    • Summertown is located in Emanuel County
    • Population from the 2020 Census: 156 people
    • Jump to TripAdvisor's Tourism page for Summertown <2>
  • Wrightsville
    (14 miles [22.5 km] to the west)
  • Wadley
    (15 miles [24.1 km] to the north)
    • Jump to our Gazetteer entry for Wadley
    • Wadley is located in Jefferson County
    • Population from the 2020 Census: 1,834 people
    • Jump to TripAdvisor's Tourism page for Wadley <2>
  • Bartow
    (15 miles [24.1 km] to the north)
  • Colemans Lake
    (16 miles [25.7 km] to the northeast)
    • Jump to our Gazetteer entry for Colemans Lake
    • Colemans Lake is located in Emanuel County
  • Lovett
    (16 miles [25.7 km] to the west)
    • Jump to our Gazetteer entry for Lovett
    • Lovett is located in Laurens County
  • Rockledge
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rockledge have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockledge
    • Rockledge is located in Laurens County
    • Estimated population in 2019: 4,433 people
    • Jump to TripAdvisor's Tourism page for Rockledge <2>
  • Midville
    (18 miles [29 km] to the northeast)
  • Harrison
    (18 miles [29 km] to the northwest)
  • Soperton
    (19 miles [30.6 km] to the south)
  • Twin City
    (19 miles [30.6 km] to the east)
  • Moxley
    (19 miles [30.6 km] to the north)
    • Jump to our Gazetteer entry for Moxley
    • Moxley is located in Jefferson County
  • Riddleville
    (20 miles [32.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Riddleville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Riddleville
    • Riddleville is located in Washington County
    • Population from the 2020 Census: 86 people
  • Old Town
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Old Town have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Town
    • Old Town is located in Jefferson County
  • Stillmore
    (21 miles [33.8 km] to the southeast)
  • Oak Park
    (22 miles [35.4 km] to the southeast)
  • Garfield
    (22 miles [35.4 km] to the east)

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Townsend - Gunn Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.6527, Longitude: -82.4874       In this case, the coordinates for the Townsend - Gunn Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.