|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Old Slave Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Old Slave Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Old Slave Cemetery. We've listed the following communities based on their distance, with the closest first.
- Darien
(4 miles [6.4 km] to the northeast)
- Glynco
(6 miles [9.7 km] to the south)
- Country Club Estates
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Country Club Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Country Club Estates
- Country Club Estates is located in Glynn County
- Dock Junction
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Dock Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dock Junction
- Dock Junction is located in Glynn County
- Blythe Island
(9 miles [14.5 km] to the southwest)
- Jump to our Gazetteer entry for Blythe Island
- Blythe Island is located in Glynn County
- Estimated population in 2019: 711 people
- German Village
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for German Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for German Village
- German Village is located in Glynn County
- Brunswick
(11 miles [17.7 km] to the south)
- Jewtown
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Jewtown. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jewtown
- Jewtown is located in Glynn County
- Sea Island
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Sea Island have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sea Island
- Sea Island is located in Glynn County
- Jump to TripAdvisor's Tourism page for Sea Island <2>
- Meridian
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Meridian have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meridian
- Meridian is located in McIntosh County
- Jump to TripAdvisor's Tourism page for Meridian <2>
- Altamaha Park
(11 miles [17.7 km] to the northwest)
- Jump to our Gazetteer entry for Altamaha Park
- Altamaha Park is located in Glynn County
- King City
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for King City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for King City
- King City is located in Glynn County
- Saint Simons Island
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Simons Island have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Simons Island
- Saint Simons Island is located in Glynn County
- Jump to TripAdvisor's Tourism page for Saint Simons Island <2>
- Sapelo Island
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Sapelo Island have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sapelo Island
- Sapelo Island is located in McIntosh County
- Jump to TripAdvisor's Tourism page for Sapelo Island <2>
- Thalmann
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Thalmann
- Thalmann is located in Glynn County
- Georgetown
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Glynn County
- Saint Simons
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Saint Simons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Simons
- Saint Simons is located in Glynn County
- Valona
(13 miles [20.9 km] to the northeast)
- Credit Hill
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Credit Hill
- Credit Hill is located in McIntosh County
- Crescent
(14 miles [22.5 km] to the northeast)
- Townsend
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Townsend have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Townsend
- Townsend is located in McIntosh County
- Jump to TripAdvisor's Tourism page for Townsend <2>
- Hickory Bluff
(16 miles [25.7 km] to the south)
- Jump to our Gazetteer entry for Hickory Bluff
- Hickory Bluff is located in Camden County
- Waynesville
(19 miles [30.6 km] to the west)
- Shellman Bluff
(19 miles [30.6 km] to the northeast)
- Waverly
(21 miles [33.8 km] to the southwest)
- Pendarvis
(21 miles [33.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pendarvis. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pendarvis
- Pendarvis is located in Wayne County
- Estimated population in 2019: 562 people
Off-the-Road Links ...
The official website for Glynn County: www.glynncounty.org/ The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Old Slave Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.3141, Longitude: -81.4720 In this case, the coordinates for the Old Slave Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|