|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McRae Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McRae Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McRae Cemetery. We've listed the following communities based on their distance, with the closest first.
- Alamo
(Less than 2 miles to the west)
- Glenwood
(5 miles [8 km] to the northeast)
- Scotland
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Scotland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scotland
- Scotland is located in Telfair County
- Population from the 2020 Census: 334 people
- Jump to TripAdvisor's Tourism page for Scotland <2>
- McRae - Helena
(9 miles [14.5 km] to the southwest)
- McRae
(9 miles [14.5 km] to the southwest)
- Jump to our Gazetteer entry for McRae
- McRae is located in Telfair County
- Helena
(10 miles [16.1 km] to the southwest)
- Mount Vernon
(10 miles [16.1 km] to the east)
- Cedar Grove
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Cedar Grove
- Cedar Grove is located in Laurens County
- Ailey
(11 miles [17.7 km] to the east)
- Lumber City
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Lumber City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber City
- Lumber City is located in Telfair County
- Population from the 2020 Census: 1,251 people
- Jump to TripAdvisor's Tourism page for Lumber City <2>
- Lumber City Ferry
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Lumber City Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber City Ferry
- Lumber City Ferry is located in Jeff Davis County
- Estimated population in 2019: 1,257 people
- Uvalda
(16 miles [25.7 km] to the southeast)
- Tarrytown
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Tarrytown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tarrytown
- Tarrytown is located in Montgomery County
- Population from the 2020 Census: 82 people
- Jump to TripAdvisor's Tourism page for Tarrytown <2>
- Alston
(17 miles [27.4 km] to the east)
- Petross
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Petross. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Petross
- Petross is located in Montgomery County
- Higgston
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Higgston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Higgston
- Higgston is located in Montgomery County
- Population from the 2020 Census: 305 people
- Chauncey
(17 miles [27.4 km] to the west)
- Soperton
(18 miles [29 km] to the northeast)
- Milan
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Milan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milan
- Milan is located in Telfair County
- Population from the 2020 Census: 649 people
- Jump to TripAdvisor's Tourism page for Milan <2>
- Rock Springs
(20 miles [32.2 km] to the east)
- Jump to our Gazetteer entry for Rock Springs
- Rock Springs is located in Toombs County
- Charles
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Charles have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charles
- Charles is located in Toombs County
- Hazlehurst
(21 miles [33.8 km] to the southeast)
- Vidalia
(21 miles [33.8 km] to the east)
- Rockledge
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Rockledge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockledge
- Rockledge is located in Laurens County
- Estimated population in 2019: 4,433 people
- Jump to TripAdvisor's Tourism page for Rockledge <2>
- Rentz
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Rentz have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rentz
- Rentz is located in Laurens County
- Population from the 2020 Census: 286 people
- Jump to TripAdvisor's Tourism page for Rentz <2>
- Cadwell
(21 miles [33.8 km] to the northwest)
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McRae Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.1430, Longitude: -82.7615 In this case, the coordinates for the McRae Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|