|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McHaffey Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McHaffey Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McHaffey Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Lawrenceville
(2 miles [3.2 km] to the northwest)
- Grayson
(3 miles [4.8 km] to the south)
- Dacula
(4 miles [6.4 km] to the northeast)
- Oak Village
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Oak Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Village
- Oak Village is located in Gwinnett County
- Snellville
(7 miles [11.3 km] to the southwest)
- Friendly Village of Crooked Creek
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Friendly Village of Crooked Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Friendly Village of Crooked Creek
- Friendly Village of Crooked Creek is located in Gwinnett County
- Loganville
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Loganville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loganville
- Loganville is located in Gwinnett County
- Population from the 2020 Census: 13,310 people
- Jump to TripAdvisor's Tourism page for Loganville <2>
- Auburn
(8 miles [12.9 km] to the northeast)
- Twin Village
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Twin Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin Village
- Twin Village is located in Gwinnett County
- Carl
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Carl have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carl
- Carl is located in Barrow County
- Population from the 2020 Census: 245 people
- Suwanee
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Suwanee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Suwanee
- Suwanee is located in Gwinnett County
- Population from the 2020 Census: 21,803 people
- Jump to TripAdvisor's Tourism page for Suwanee <2>
- Centerville
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Centerville
- Centerville is located in Gwinnett County
- Estimated population in 2019: 7,884 people
- Split Silk
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Split Silk have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Split Silk
- Split Silk is located in Walton County
- Lilburn
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Lilburn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lilburn
- Lilburn is located in Gwinnett County
- Population from the 2020 Census: 13,055 people
- Jump to TripAdvisor's Tourism page for Lilburn <2>
- Duluth
(11 miles [17.7 km] to the west)
- Mountain Park
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Mountain Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Park
- Mountain Park is located in Gwinnett County
- Buford
(12 miles [19.3 km] to the north)
- Youth
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Youth
- Youth is located in Walton County
- Between
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Between
- Between is located in Walton County
- Population from the 2020 Census: 386 people
- Sugar Hill
(12 miles [19.3 km] to the northwest)
- Nicholasville
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Nicholasville
- Nicholasville is located in Walton County
- Estimated population in 2019: 3,333 people
- Zingara
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Zingara
- Zingara is located in Rockdale County
- Bethlehem
(13 miles [20.9 km] to the east)
- Winder
(13 miles [20.9 km] to the east)
- Rest Haven
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Rest Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rest Haven
- Rest Haven is located in Gwinnett County
- Population from the 2020 Census: 65 people
- Berkeley Lake
(13 miles [20.9 km] to the west)
Off-the-Road Links ...
The official website for Gwinnett County: www.co.gwinnett.ga.us/ The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McHaffey Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.9440, Longitude: -83.9557 In this case, the coordinates for the McHaffey Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|