|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McGinnis Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McGinnis Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McGinnis Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ila
(4 miles [6.4 km] to the east)
- Nicholson
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Nicholson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Jackson County
- Population from the 2020 Census: 1,909 people
- Jump to TripAdvisor's Tourism page for Nicholson <2>
- Planter
(5 miles [8 km] to the southeast)
- Commerce
(5 miles [8 km] to the west)
- Shiloh
(8 miles [12.9 km] to the east)
- Danielsville
(9 miles [14.5 km] to the southeast)
- Dalton
(11 miles [17.7 km] to the east)
- Maysville
(11 miles [17.7 km] to the west)
- Jefferson
(12 miles [19.3 km] to the southwest)
- Arcade
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Arcade have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcade
- Arcade is located in Jackson County
- Population from the 2020 Census: 2,040 people
- Hull
(12 miles [19.3 km] to the south)
- Plainview
(12 miles [19.3 km] to the north)
- Homer
(12 miles [19.3 km] to the northwest)
- Attica
(13 miles [20.9 km] to the southwest)
- Colbert
(13 miles [20.9 km] to the southeast)
- Harrison
(14 miles [22.5 km] to the east)
- Franklin Springs
(14 miles [22.5 km] to the northeast)
- Carnesville
(14 miles [22.5 km] to the northeast)
- Athens
(15 miles [24.1 km] to the south)
- Holly Springs
(15 miles [24.1 km] to the west)
- Winterville
(16 miles [25.7 km] to the south)
- Comer
(16 miles [25.7 km] to the southeast)
- Royston
(16 miles [25.7 km] to the northeast)
- Gillsville
(16 miles [25.7 km] to the northwest)
- Pendergrass
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Pendergrass have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendergrass
- Pendergrass is located in Jackson County
- Population from the 2020 Census: 577 people
- Jump to TripAdvisor's Tourism page for Pendergrass <2>
Off-the-Road Links ...
The official website for Madison County: www.madisonco.us/ The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McGinnis Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.1886, Longitude: -83.3748 In this case, the coordinates for the McGinnis Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|