|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Gay Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Gay Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Gay Cemetery. We've listed the following communities based on their distance, with the closest first.
- Gay
(Less than 2 miles to the south)
- Edman
(4 miles [6.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Edman. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edman
- Edman is located in Meriwether County
- Google driving directions:
- From your current location to Edman
- From the Gay Cemetery to Edman
- Woodbury
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Woodbury have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodbury
- Woodbury is located in Meriwether County
- Population from the 2020 Census: 898 people
- Jump to TripAdvisor's Tourism page for Woodbury <2>
- Molena
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Molena have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Molena
- Molena is located in Pike County
- Population from the 2020 Census: 399 people
- Jump to TripAdvisor's Tourism page for Molena <2>
- Concord
(7 miles [11.3 km] to the east)
- Rocky Mount
(7 miles [11.3 km] to the northwest)
- Hilltop
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Hilltop have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hilltop
- Hilltop is located in Pike County
- Greenville
(9 miles [14.5 km] to the southwest)
- Haralson
(9 miles [14.5 km] to the north)
- Harris City
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Harris City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harris City
- Harris City is located in Meriwether County
- Luthersville
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Luthersville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luthersville
- Luthersville is located in Meriwether County
- Population from the 2020 Census: 831 people
- Jump to TripAdvisor's Tourism page for Luthersville <2>
- Zebulon
(13 miles [20.9 km] to the east)
- Williamson
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Williamson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamson
- Williamson is located in Pike County
- Population from the 2020 Census: 521 people
- Jump to TripAdvisor's Tourism page for Williamson <2>
- Bullochville ‑ Historic
(14 miles [22.5 km] to the south)
- Barker Spring
(14 miles [22.5 km] to the southeast)
- Brooks
(14 miles [22.5 km] to the northeast)
- Senoia
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Senoia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Senoia
- Senoia is located in Coweta County
- Population from the 2020 Census: 4,528 people
- Jump to TripAdvisor's Tourism page for Senoia <2>
- Lone Oak
(14 miles [22.5 km] to the west)
- Warm Springs
(15 miles [24.1 km] to the southwest)
- Meansville
(15 miles [24.1 km] to the east)
- Smith City
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Smith City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smith City
- Smith City is located in Coweta County
- Turin
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Turin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turin
- Turin is located in Coweta County
- Population from the 2020 Census: 395 people
- Jump to TripAdvisor's Tourism page for Turin <2>
- Manchester
(16 miles [25.7 km] to the south)
- Chalybeate Springs
(16 miles [25.7 km] to the south)
- Sunset Village
(16 miles [25.7 km] to the southeast)
- Jade Lake Village
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Jade Lake Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jade Lake Village
- Jade Lake Village is located in Coweta County
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Gay Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.0971, Longitude: -84.5754 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|