Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the De Loach & Moore Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the De Loach & Moore Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the De Loach & Moore Cemetery. We've listed the following communities based on their distance, with the closest first.
- Daisy
(4 miles [6.4 km] to the south)- Jump to our Gazetteer entry for Daisy
- Daisy is located in Evans County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Daisy <2>
- Google driving directions:
- From your current location to Daisy
- From the De Loach & Moore Cemetery to Daisy
- Claxton
(6 miles [9.7 km] to the southwest)- Jump to our Gazetteer entry for Claxton
- Claxton is located in Evans County
- Population from the 2020 Census: 2,216 people
- Jump to TripAdvisor's Tourism page for Claxton <2>
- Google driving directions:
- From your current location to Claxton
- From the De Loach & Moore Cemetery to Claxton
- Hagan
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Hagan
- Hagan is located in Evans County
- Population from the 2020 Census: 953 people
- Jump to TripAdvisor's Tourism page for Hagan <2>
- Google driving directions:
- From your current location to Hagan
- From the De Loach & Moore Cemetery to Hagan
- New Hope
(9 miles [14.5 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for New Hope. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Bulloch County
- Google driving directions:
- From your current location to New Hope
- From the De Loach & Moore Cemetery to New Hope
- Bellville
(10 miles [16.1 km] to the southwest)- Jump to our Gazetteer entry for Bellville
- Bellville is located in Evans County
- Population from the 2020 Census: 117 people
- Jump to TripAdvisor's Tourism page for Bellville <2>
- Google driving directions:
- From your current location to Bellville
- From the De Loach & Moore Cemetery to Bellville
- Register
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Register have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Register
- Register is located in Bulloch County
- Population from the 2020 Census: 197 people
- Jump to TripAdvisor's Tourism page for Register <2>
- Manassas
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Manassas
- Manassas is located in Tattnall County
- Population from the 2020 Census: 87 people
- Jump to TripAdvisor's Tourism page for Manassas <2>
- Google driving directions:
- From your current location to Manassas
- From the De Loach & Moore Cemetery to Manassas
- Pembroke
(12 miles [19.3 km] to the southeast)- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Bryan County
- Population from the 2020 Census: 2,683 people
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Midway
(13 miles [20.9 km] to the south)- Jump to our Gazetteer entry for Midway
- Midway is located in Tattnall County
- Estimated population in 2019: 657 people
- Google driving directions:
- From your current location to Midway
- From the De Loach & Moore Cemetery to Midway
- Olde Towne
(13 miles [20.9 km] to the north)- Note: The GPS coordinates that we are using for Olde Towne have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olde Towne
- Olde Towne is located in Bulloch County
- Brooklet
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Brooklet
- Brooklet is located in Bulloch County
- Population from the 2020 Census: 1,935 people
- Jump to TripAdvisor's Tourism page for Brooklet <2>
- Google driving directions:
- From your current location to Brooklet
- From the De Loach & Moore Cemetery to Brooklet
- Pulaski
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Candler County
- Population from the 2020 Census: 265 people
- Jump to TripAdvisor's Tourism page for Pulaski <2>
- Google driving directions:
- From your current location to Pulaski
- From the De Loach & Moore Cemetery to Pulaski
- Statesboro
(15 miles [24.1 km] to the north)- Note: The GPS coordinates that we are using for Statesboro have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statesboro
- Statesboro is located in Bulloch County
- Population from the 2020 Census: 33,204 people
- Jump to TripAdvisor's Tourism page for Statesboro <2>
- Leefield
(17 miles [27.4 km] to the northeast)- Jump to our Gazetteer entry for Leefield
- Leefield is located in Bulloch County
- Google driving directions:
- From your current location to Leefield
- From the De Loach & Moore Cemetery to Leefield
- Collins
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Collins
- Collins is located in Tattnall County
- Population from the 2020 Census: 568 people
- Jump to TripAdvisor's Tourism page for Collins <2>
- Google driving directions:
- From your current location to Collins
- From the De Loach & Moore Cemetery to Collins
- Ellabell
(19 miles [30.6 km] to the east)- Jump to our Gazetteer entry for Ellabell
- Ellabell is located in Bryan County
- Jump to TripAdvisor's Tourism page for Ellabell <2>
- Google driving directions:
- From your current location to Ellabell
- From the De Loach & Moore Cemetery to Ellabell
- Hubert
(19 miles [30.6 km] to the east)- Jump to our Gazetteer entry for Hubert
- Hubert is located in Bulloch County
- Google driving directions:
- From your current location to Hubert
- From the De Loach & Moore Cemetery to Hubert
- Metter
(19 miles [30.6 km] to the northwest)- Jump to our Gazetteer entry for Metter
- Metter is located in Candler County
- Population from the 2020 Census: 4,007 people
- Jump to TripAdvisor's Tourism page for Metter <2>
- Google driving directions:
- From your current location to Metter
- From the De Loach & Moore Cemetery to Metter
- Cobbtown
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Cobbtown
- Cobbtown is located in Tattnall County
- Population from the 2020 Census: 342 people
- Former name for Cobbtown:
- Cobb Town
- Jump to TripAdvisor's Tourism page for Cobbtown <2>
- Google driving directions:
- From your current location to Cobbtown
- From the De Loach & Moore Cemetery to Cobbtown
- Reidsville
(20 miles [32.2 km] to the southwest)- Note: The GPS coordinates that we are using for Reidsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reidsville
- Reidsville is located in Tattnall County
- Population from the 2020 Census: 2,665 people
- Jump to TripAdvisor's Tourism page for Reidsville <2>
- Glennville
(20 miles [32.2 km] to the south)- Jump to our Gazetteer entry for Glennville
- Glennville is located in Tattnall County
- Population from the 2020 Census: 5,014 people
- Jump to TripAdvisor's Tourism page for Glennville <2>
- Google driving directions:
- From your current location to Glennville
- From the De Loach & Moore Cemetery to Glennville
- Clito
(20 miles [32.2 km] to the north)- Jump to our Gazetteer entry for Clito
- Clito is located in Bulloch County
- Google driving directions:
- From your current location to Clito
- From the De Loach & Moore Cemetery to Clito
- Portal
(22 miles [35.4 km] to the north)- Note: The GPS coordinates that we are using for Portal have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portal
- Portal is located in Bulloch County
- Population from the 2020 Census: 707 people
- Jump to TripAdvisor's Tourism page for Portal <2>
- Eden
(24 miles [38.6 km] to the east)- Jump to our Gazetteer entry for Eden
- Eden is located in Effingham County
- Jump to TripAdvisor's Tourism page for Eden <2>
- Google driving directions:
- From your current location to Eden
- From the De Loach & Moore Cemetery to Eden
- Marlow
(24 miles [38.6 km] to the east)- Jump to our Gazetteer entry for Marlow
- Marlow is located in Effingham County
- Google driving directions:
- From your current location to Marlow
- From the De Loach & Moore Cemetery to Marlow
- Ohoopee
(24 miles [38.6 km] to the west)- Jump to our Gazetteer entry for Ohoopee
- Ohoopee is located in Toombs County
- Google driving directions:
- From your current location to Ohoopee
- From the De Loach & Moore Cemetery to Ohoopee
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the De Loach & Moore Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.2196, Longitude: -81.8100 |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |