Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Daniel Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Daniel Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Daniel Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Glynco
(2 miles [3.2 km] to the southeast)
- Dock Junction
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Dock Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dock Junction
- Dock Junction is located in Glynn County
- Blythe Island
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for Blythe Island
- Blythe Island is located in Glynn County
- Estimated population in 2019: 711 people
- Country Club Estates
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Country Club Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Country Club Estates
- Country Club Estates is located in Glynn County
- Brunswick
(7 miles [11.3 km] to the southeast)
- Georgetown
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Glynn County
- Thalmann
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Thalmann
- Thalmann is located in Glynn County
- Jewtown
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Jewtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jewtown
- Jewtown is located in Glynn County
- Darien
(10 miles [16.1 km] to the northeast)
- Hickory Bluff
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Hickory Bluff
- Hickory Bluff is located in Camden County
- King City
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for King City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for King City
- King City is located in Glynn County
- German Village
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for German Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for German Village
- German Village is located in Glynn County
- Altamaha Park
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Altamaha Park
- Altamaha Park is located in Glynn County
- Saint Simons
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Simons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Simons
- Saint Simons is located in Glynn County
- Saint Simons Island
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Simons Island have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Simons Island
- Saint Simons Island is located in Glynn County
- Jump to TripAdvisor's Tourism page for Saint Simons Island <2>
- Sea Island
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Sea Island have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sea Island
- Sea Island is located in Glynn County
- Jump to TripAdvisor's Tourism page for Sea Island <2>
- Waynesville
(14 miles [22.5 km] to the west)
- Waverly
(15 miles [24.1 km] to the southwest)
- Meridian
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Meridian have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meridian
- Meridian is located in McIntosh County
- Jump to TripAdvisor's Tourism page for Meridian <2>
- White Oak
(18 miles [29 km] to the southwest)
- Sapelo Island
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Sapelo Island have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sapelo Island
- Sapelo Island is located in McIntosh County
- Jump to TripAdvisor's Tourism page for Sapelo Island <2>
- Credit Hill
(18 miles [29 km] to the north)
- Jump to our Gazetteer entry for Credit Hill
- Credit Hill is located in McIntosh County
- Valona
(19 miles [30.6 km] to the northeast)
- Townsend
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Townsend have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Townsend
- Townsend is located in McIntosh County
- Jump to TripAdvisor's Tourism page for Townsend <2>
- Crescent
(20 miles [32.2 km] to the northeast)
Off-the-Road Links ...
The official website for Glynn County: www.glynncounty.org/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Daniel Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.2511, Longitude: -81.5479 In this case, the coordinates for the Daniel Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |