|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Culbertson Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Culbertson Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Culbertson Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ila
(2 miles [3.2 km] to the southeast)
- Planter
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for Planter
- Planter is located in Madison County
- Shiloh
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Madison County
- Danielsville
(7 miles [11.3 km] to the southeast)
- Nicholson
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Nicholson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Jackson County
- Population from the 2020 Census: 1,909 people
- Jump to TripAdvisor's Tourism page for Nicholson <2>
- Dalton
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Dalton
- Dalton is located in Madison County
- Estimated population in 2019: 33,665 people
- Commerce
(8 miles [12.9 km] to the west)
- Harrison
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Harrison
- Harrison is located in Madison County
- Estimated population in 2019: 442 people
- Plainview
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Plainview. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Franklin County
- Franklin Springs
(11 miles [17.7 km] to the northeast)
- Hull
(12 miles [19.3 km] to the south)
- Colbert
(12 miles [19.3 km] to the southeast)
- Carnesville
(12 miles [19.3 km] to the north)
- Royston
(13 miles [20.9 km] to the northeast)
- Aquilla ‑ Historic
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Aquilla
- Aquilla is located in Franklin County
- Comer
(14 miles [22.5 km] to the southeast)
- Homer
(14 miles [22.5 km] to the northwest)
- Maysville
(14 miles [22.5 km] to the west)
- Jefferson
(15 miles [24.1 km] to the west)
- Arcade
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Arcade have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcade
- Arcade is located in Jackson County
- Population from the 2020 Census: 2,040 people
- Canon
(15 miles [24.1 km] to the northeast)
- Attica
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Attica
- Attica is located in Jackson County
- Athens
(16 miles [25.7 km] to the south)
- Winterville
(16 miles [25.7 km] to the south)
- Bowman
(16 miles [25.7 km] to the east)
- Parhams
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Parhams. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Parhams
- Parhams is located in Franklin County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Culbertson Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.1976, Longitude: -83.3140 In this case, the coordinates for the Culbertson Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|