|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Big Sandy Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Big Sandy Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Big Sandy Cemetery. We've listed the following communities based on their distance, with the closest first.
- Toomsboro
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Toomsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toomsboro
- Toomsboro is located in Wilkinson County
- Population from the 2020 Census: 478 people
- Jump to TripAdvisor's Tourism page for Toomsboro <3>
- Beech Hill
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Beech Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Hill
- Beech Hill is located in Wilkinson County
- Irwinton
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Irwinton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irwinton
- Irwinton is located in Wilkinson County
- Population from the 2020 Census: 546 people
- Jump to TripAdvisor's Tourism page for Irwinton <3>
- Allentown
(10 miles [16.1 km] to the southwest)
- Montrose
(10 miles [16.1 km] to the southwest)
- Dudley
(10 miles [16.1 km] to the south)
- Danville
(11 miles [17.7 km] to the southwest)
- McIntyre
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for McIntyre have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIntyre
- McIntyre is located in Wilkinson County
- Population from the 2020 Census: 598 people
- Jump to TripAdvisor's Tourism page for McIntyre <3>
- Oconee
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Oconee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oconee
- Oconee is located in Washington County
- Population from the 2020 Census: 240 people
- Jump to TripAdvisor's Tourism page for Oconee <3>
- Dublin
(14 miles [22.5 km] to the southeast)
- East Dublin
(15 miles [24.1 km] to the southeast)
- Jeffersonville
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Jeffersonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jeffersonville
- Jeffersonville is located in Twiggs County
- Population from the 2020 Census: 931 people
- Jump to TripAdvisor's Tourism page for Jeffersonville <3>
- Dexter
(18 miles [29 km] to the south)
- Lovett
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Lovett
- Lovett is located in Laurens County
- Ivey
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Ivey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ivey
- Ivey is located in Wilkinson County
- Population from the 2020 Census: 899 people
- Gordon
(19 miles [30.6 km] to the northwest)
- Marion
(20 miles [32.2 km] to the west)
- Jump to our Gazetteer entry for Marion
- Marion is located in Twiggs County
- Oconee Old Town ‑ Historic
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Oconee Old Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oconee Old Town
- Oconee Old Town is located in Baldwin County
- Chester
(21 miles [33.8 km] to the south)
- Wrightsville
(21 miles [33.8 km] to the east)
- Rentz
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Rentz have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rentz
- Rentz is located in Laurens County
- Population from the 2020 Census: 286 people
- Jump to TripAdvisor's Tourism page for Rentz <3>
- Mount Pleasant
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Mount Pleasant. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Baldwin County
- Harrison
(22 miles [35.4 km] to the northeast)
- Coopers
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Coopers
- Coopers is located in Baldwin County
- Brooks
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Brooks
- Brooks is located in Wilkinson County
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Big Sandy Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.6949, Longitude: -83.0829 In this case, the coordinates for the Big Sandy Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|