Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Burton Terrace in the Atlas, the following communities of the 1890's would have been found near the current location of Burton Terrace. The following communities are listed based on their distance, with the one closest to Burton Terrace listed first.
- Nahunta
(Less than 2 miles to the east)
- Hortense
(9 miles [14.5 km] to the north)
- Offerman
(15 miles [24.1 km] to the northwest)
- Patterson
(15 miles [24.1 km] to the northwest)
- Braganza
(16 miles [25.7 km] to the west)
- Braganza is located in Ware County
- Jump to our Gazetteer entry for Braganza
- Racepond
(16 miles [25.7 km] to the southwest)
- Racepond is located in Charlton County
- Jump to our Gazetteer entry for Racepond
- Tarboro
(16 miles [25.7 km] to the southeast)
- Tarboro is located in Camden County
- Jump to our Gazetteer entry for Tarboro
- Estimated population in 2019: 85 people
- Blackshear
(16 miles [25.7 km] to the northwest)
- Screven
(19 miles [30.6 km] to the north)
- Jamaica
(20 miles [32.2 km] to the east)
- Jamaica is located in Glynn County
- Jump to our Gazetteer entry for Jamaica
- Uptonville
(21 miles [33.8 km] to the south)
- Uptonville is located in Charlton County
- Jump to our Gazetteer entry for Uptonville
- Waycross
(21 miles [33.8 km] to the west)
- Tompkins
(23 miles [37 km] to the southeast)
- Tompkins is located in Camden County
- Jump to our Gazetteer entry for Tompkins
- Ritch
(24 miles [38.6 km] to the north)
- Ritch is located in Wayne County
- Jump to our Gazetteer entry for Ritch
- Mount Pleasant
(24 miles [38.6 km] to the northeast)
- Mount Pleasant is located in Wayne County
- Jump to our Gazetteer entry for Mount Pleasant
- Folkston
(25 miles [40.2 km] to the south)
- Fancy Bluff
(25 miles [40.2 km] to the east)
- Fancy Bluff is located in Glynn County
- Jump to our Gazetteer entry for Fancy Bluff
- Gardi
(25 miles [40.2 km] to the northeast)
- Gardi is located in Wayne County
- Jump to our Gazetteer entry for Gardi
- Waltertown
(25 miles [40.2 km] to the west)
- Waltertown is located in Ware County
- Jump to our Gazetteer entry for Waltertown
- Estimated population in 2019: 4,115 people
- Waltertown has also been known as:
- Watertown
- Ella Park ‑ Historic
(26 miles [41.8 km] to the east)
- Ella Park is located in Camden County
- Jump to our Gazetteer entry for Ella Park
- Estimated population in 2019: 1,867 people
- Pennick
(26 miles [41.8 km] to the east)
- Pennick is located in Glynn County
- Jump to our Gazetteer entry for Pennick
- Needham
(26 miles [41.8 km] to the west)
- Needham is located in Ware County
- Jump to our Gazetteer entry for Needham
- Traders Hill
(28 miles [45.1 km] to the south)
- Traders Hill is located in Charlton County
- Jump to our Gazetteer entry for Traders Hill
- Dock Junction
(28 miles [45.1 km] to the east)
- Dock Junction is located in Glynn County
- Jump to our Gazetteer entry for Dock Junction
- Jesup
(28 miles [45.1 km] to the north)
- Waresboro
(28 miles [45.1 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Burton Terrace, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |