|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Lower Brandywine Presbyterian Church Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Lower Brandywine Presbyterian Church Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Lower Brandywine Presbyterian Church Cemetery (FG ID #289047). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Lower Brandywine Presbyterian Church Cemetery. We've listed the following communities based on their distance, with the closest first.
- Centreville
(Less than 2 miles to the north)
- Mount Cuba
(Less than 2 miles to the southwest)
- Montchanin
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Montchanin have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montchanin
- Montchanin is located in New Castle County
- Jump to TripAdvisor's Tourism page for Montchanin <3>
- Winterthur
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Winterthur have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winterthur
- Winterthur is located in New Castle County
- Jump to TripAdvisor's Tourism page for Winterthur <3>
- Ashland
(2 miles [3.2 km] to the west)
- Greenville
(2 miles [3.2 km] to the southeast)
- Rockland
(2 miles [3.2 km] to the east)
- Norway
(2 miles [3.2 km] to the north)
- Cokesbury Village
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Cokesbury Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cokesbury Village
- Cokesbury Village is located in New Castle County
- Kentmere
(3 miles [4.8 km] to the southeast)
- Mendenhall
(3 miles [4.8 km] to the northwest)
- Talleyville
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Talleyville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talleyville
- Talleyville is located in New Castle County
- Jump to TripAdvisor's Tourism page for Talleyville <3>
- Brookfield
(3 miles [4.8 km] to the north)
- Yorklyn
(3 miles [4.8 km] to the west)
- Hockessin
(4 miles [6.4 km] to the west)
- Brandywine Springs
(4 miles [6.4 km] to the south)
- Elsmere
(4 miles [6.4 km] to the south)
- Lancaster Village
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Lancaster Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster Village
- Lancaster Village is located in New Castle County
- Concord
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Concord
- Concord is located in New Castle County
- Hamorton
(4 miles [6.4 km] to the northwest)
- Vintage Village
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Vintage Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vintage Village
- Vintage Village is located in New Castle County
- Southwood
(5 miles [8 km] to the west)
- Mendenhall Village
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Mendenhall Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mendenhall Village
- Mendenhall Village is located in New Castle County
- Duncan Village
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Duncan Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duncan Village
- Duncan Village is located in New Castle County
- Champlin Village
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Champlin Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Champlin Village
- Champlin Village is located in New Castle County
- Kennett Square
(5 miles [8 km] to the northwest)
Off-the-Road Links ...
The official website for New Castle County: www.co.new-castle.de.us/ The official website for State of Delaware: https://delaware.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Lower Brandywine Presbyterian Church Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.8074, Longitude: -75.6138 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|