|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the First Presbyterian Churchyard.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the First Presbyterian Churchyard. For information of that nature, we recommend you visit Find-A-Grave's entry for the First Presbyterian Churchyard (FG ID #1585333). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the First Presbyterian Churchyard. We've listed the following communities based on their distance, with the closest first.
- Delaware City
(Less than 2 miles to the south)
- Saint Georges
(3 miles [4.8 km] to the southwest)
- Port Penn
(4 miles [6.4 km] to the south)
- Bear
(4 miles [6.4 km] to the northwest)
- New Castle
(5 miles [8 km] to the north)
- Centennial Village
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Centennial Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Centennial Village
- Centennial Village is located in New Castle County
- Kirkwood
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Kirkwood have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirkwood
- Kirkwood is located in New Castle County
- Jump to TripAdvisor's Tourism page for Kirkwood <3>
- McDonough
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for McDonough have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDonough
- McDonough is located in New Castle County
- Salem
(6 miles [9.7 km] to the east)
- Pennsville
(6 miles [9.7 km] to the northeast)
- Raintree Village
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Raintree Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raintree Village
- Raintree Village is located in New Castle County
- Keeney
(6 miles [9.7 km] to the northwest)
- Summit Bridge
(7 miles [11.3 km] to the southwest)
- Pointers
(7 miles [11.3 km] to the east)
- Christiana
(7 miles [11.3 km] to the northwest)
- Christiana Village
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Christiana Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christiana Village
- Christiana Village is located in New Castle County
- Wilmington Manor
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Wilmington Manor have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilmington Manor
- Wilmington Manor is located in New Castle County
- Woodshade
(7 miles [11.3 km] to the northwest)
- Hancocks Bridge
(8 miles [12.9 km] to the southeast)
- Ogletown
(8 miles [12.9 km] to the northwest)
- Salem Village
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Salem Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem Village
- Salem Village is located in New Castle County
- Glasgow
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Glasgow have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glasgow
- Glasgow is located in New Castle County
- Odessa
(9 miles [14.5 km] to the southwest)
- Stanton
(9 miles [14.5 km] to the north)
- Ruthby
(9 miles [14.5 km] to the northwest)
- Brookside
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Brookside have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brookside
- Brookside is located in New Castle County
- Wilson
(9 miles [14.5 km] to the northwest)
- Newport
(9 miles [14.5 km] to the north)
- Pencader Village
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Pencader Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pencader Village
- Pencader Village is located in New Castle County
Off-the-Road Links ...
The official website for New Castle County: www.co.new-castle.de.us/ The official website for State of Delaware: https://delaware.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the First Presbyterian Churchyard. The point we use is located at these GPS coordinates - Latitude: 39.5785, Longitude: -75.5931 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|