|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Banning Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Banning Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Banning Cemetery. We've listed the following communities based on their distance, with the closest first.
- Banning ‑ Historic
(2 miles [3.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Banning. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Banning
- Banning is located in Sussex County
- Ellendale
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Ellendale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellendale
- Ellendale is located in Sussex County
- Population from the 2020 Census: 448 people
- Jump to TripAdvisor's Tourism page for Ellendale <4>
- Lincoln
(6 miles [9.7 km] to the northeast)
- Lincoln Village
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Lincoln Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lincoln Village
- Lincoln Village is located in Sussex County
- Greenwood
(6 miles [9.7 km] to the west)
- Bridgeville
(7 miles [11.3 km] to the southwest)
- Williamsville
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Williamsville
- Williamsville is located in Kent County
- Jefferson Crossroads
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Jefferson Crossroads
- Jefferson Crossroads is located in Sussex County
- Anderson Crossroads
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Anderson Crossroads
- Anderson Crossroads is located in Sussex County
- Farmington
(7 miles [11.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Farmington. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Farmington
- Farmington is located in Kent County
- Population from the 2020 Census: 124 people
- Jump to TripAdvisor's Tourism page for Farmington <4>
- Georgetown
(8 miles [12.9 km] to the southeast)
- Milton
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milton
- Milton is located in Sussex County
- Population from the 2020 Census: 3,129 people
- Jump to TripAdvisor's Tourism page for Milton <4>
- East Side Village
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for East Side Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Side Village
- East Side Village is located in Sussex County
- Waples
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Waples. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Waples
- Waples is located in Sussex County
- Argo Corners
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Argo Corners
- Argo Corners is located in Sussex County
- Milford
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milford
- Milford is located in Kent County
- Population from the 2020 Census: 12,278 people
- Jump to TripAdvisor's Tourism page for Milford <4>
- Andrewsville
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Andrewsville
- Andrewsville is located in Kent County
- Houston
(9 miles [14.5 km] to the north)
- Woods Haven
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Woods Haven
- Woods Haven is located in Kent County
- Church Hill Village
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Church Hill Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Church Hill Village
- Church Hill Village is located in Kent County
- Scotts Corner
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Scotts Corner
- Scotts Corner is located in Sussex County
- Briar Hook
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Briar Hook
- Briar Hook is located in Sussex County
- Heritage Village
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Heritage Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heritage Village
- Heritage Village is located in Sussex County
- Ross
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ross. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ross
- Ross is located in Sussex County
- Harbeson
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Harbeson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harbeson
- Harbeson is located in Sussex County
- Jump to TripAdvisor's Tourism page for Harbeson <4>
- Harrington
(11 miles [17.7 km] to the northwest)
- Adamsville
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Adamsville
- Adamsville is located in Kent County
Off-the-Road Links ...
The official website for Sussex County: www.sussexcounty.net/ The official website for State of Delaware: https://delaware.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Banning Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.7837, Longitude: -75.4785 In this case, the coordinates for the Banning Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|