|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Morningside Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Morningside Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Morningside Cemetery (FG ID #103484). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Morningside Cemetery. We've listed the following communities based on their distance, with the closest first.
- Gaylordsville
(Less than 2 miles to the south)
- New Milford
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for New Milford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Milford
- New Milford is located in Litchfield County
- Population from the 2020 Census: 26,683 people
- South Kent
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for South Kent have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Kent
- South Kent is located in Litchfield County
- Jump to TripAdvisor's Tourism page for South Kent <3>
- Bulls Bridge
(2 miles [3.2 km] to the northwest)
- Dogtail Corners
(2 miles [3.2 km] to the northwest)
- Sherman
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Sherman have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherman
- Sherman is located in Fairfield County
- Population from the 2020 Census: 3,610 people
- Northville
(4 miles [6.4 km] to the east)
- Sherman
(5 miles [8 km] to the south)
- Marble Dale
(5 miles [8 km] to the east)
- Kent
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Kent have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kent
- Kent is located in Litchfield County
- Population from the 2020 Census: 2,766 people
- Kent
(5 miles [8 km] to the north)
- New Milford
(6 miles [9.7 km] to the southeast)
- New Preston
(6 miles [9.7 km] to the east)
- Dover Plains
(7 miles [11.3 km] to the northwest)
- Pawling
(8 miles [12.9 km] to the southwest)
- Lanesville
(8 miles [12.9 km] to the south)
- Washington
(8 miles [12.9 km] to the east)
- Washington
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Washington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Washington
- Washington is located in Litchfield County
- Population from the 2020 Census: 3,419 people
- Washington Depot
(8 miles [12.9 km] to the east)
- North Kent
(8 miles [12.9 km] to the north)
- Warren
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Warren have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warren
- Warren is located in Litchfield County
- Population from the 2020 Census: 1,389 people
- Warren
(9 miles [14.5 km] to the northeast)
- North Clove
(9 miles [14.5 km] to the west)
- Poughquag
(10 miles [16.1 km] to the west)
- Chimney Point
(10 miles [16.1 km] to the south)
- Bridgewater
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bridgewater have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bridgewater
- Bridgewater is located in Litchfield County
- Population from the 2020 Census: 1,632 people
- Bridgewater
(10 miles [16.1 km] to the southeast)
- Roxbury Station
(10 miles [16.1 km] to the southeast)
- Romford
(10 miles [16.1 km] to the east)
- Woodville
(10 miles [16.1 km] to the east)
- Camby
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Camby. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Camby
- Camby is located in Dutchess County (NY)
- Google driving directions:
- From your current location to Camby
- From the Morningside Cemetery to Camby
- Clove
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Clove. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Clove
- Clove is located in Dutchess County (NY)
- Google driving directions:
- From your current location to Clove
- From the Morningside Cemetery to Clove
Off-the-Road Links ...
The official website for State of Connecticut: https://portal.ct.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Morningside Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.6511, Longitude: -73.4831 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|