Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Shiloh Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Shiloh Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Shiloh Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Russellville
(2 miles [3.2 km] to the south)- Jump to our Gazetteer entry for Russellville
- Russellville is located in Pope County
- Population from the 2020 Census: 29,364 people
- Jump to TripAdvisor's Tourism page for Russellville <2>
- Center Valley
(2 miles [3.2 km] to the east)- Jump to our Gazetteer entry for Center Valley
- Center Valley is located in Pope County
- Taral
(3 miles [4.8 km] to the north)- Jump to our Gazetteer entry for Taral
- Taral is located in Pope County
- Bernice
(4 miles [6.4 km] to the south)- Jump to our Gazetteer entry for Bernice
- Bernice is located in Pope County
- Dardanelle
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for Dardanelle
- Dardanelle is located in Yell County
- Population from the 2020 Census: 4,498 people
- Jump to TripAdvisor's Tourism page for Dardanelle <2>
- Pottsville
(6 miles [9.7 km] to the southeast)- Jump to our Gazetteer entry for Pottsville
- Pottsville is located in Pope County
- Population from the 2020 Census: 3,361 people
- Former names for Pottsville:
- Pott's Inn
- Pott's Station
- Dover
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Pope County
- Population from the 2020 Census: 1,445 people
- Jump to TripAdvisor's Tourism page for Dover <2>
- London
(6 miles [9.7 km] to the west)- Jump to our Gazetteer entry for London
- London is located in Pope County
- Population from the 2020 Census: 1,063 people
- Jump to TripAdvisor's Tourism page for London <2>
- Georgetown
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for Georgetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Pope County
- Delaware
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Delaware
- Delaware is located in Logan County
- Oak Grove
(10 miles [16.1 km] to the east)- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Pope County
- Caglesville
(10 miles [16.1 km] to the northeast)- Note: The GPS coordinates that we are using for Caglesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caglesville
- Caglesville is located in Pope County
- Scottsville
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Scottsville
- Scottsville is located in Pope County
- Holla Bend
(11 miles [17.7 km] to the southeast)- Note: The GPS coordinates that we are using for Holla Bend have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holla Bend
- Holla Bend is located in Pope County
- Ross
(11 miles [17.7 km] to the northwest) - Atkins
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Atkins
- Atkins is located in Pope County
- Population from the 2020 Census: 3,042 people
- Jump to TripAdvisor's Tourism page for Atkins <2>
- Chickalah
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Chickalah
- Chickalah is located in Yell County
- Silex
(13 miles [20.9 km] to the north) - Wilson
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Wilson
- Wilson is located in Pope County
- Jump to TripAdvisor's Tourism page for Wilson <2>
- Economy
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Economy
- Economy is located in Pope County
- Hector
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for Hector
- Hector is located in Pope County
- Population from the 2020 Census: 465 people
- Jump to TripAdvisor's Tourism page for Hector <2>
- Centerville
(14 miles [22.5 km] to the south)- Jump to our Gazetteer entry for Centerville
- Centerville is located in Yell County
- Cotton Town
(14 miles [22.5 km] to the south)- Note: The GPS coordinates that we are using for Cotton Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cotton Town
- Cotton Town is located in Yell County
- Knoxville
(14 miles [22.5 km] to the west) - Petit Jean
(15 miles [24.1 km] to the south)- Note: The GPS coordinates that we are using for Petit Jean have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Petit Jean
- Petit Jean is located in Yell County
- Pontoon
(15 miles [24.1 km] to the southeast)
Off-the-Road Links ...
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Shiloh Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.3167, Longitude: -93.1338 In this case, the coordinates for the Shiloh Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |