Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pledger Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pledger Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pledger Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Delaware
(Less than 2 miles to the southwest)- Jump to our Gazetteer entry for Delaware
- Delaware is located in Logan County
- London
(2 miles [3.2 km] to the northeast)- Jump to our Gazetteer entry for London
- London is located in Pope County
- Population from the 2020 Census: 1,063 people
- Jump to TripAdvisor's Tourism page for London <2>
- Georgetown
(2 miles [3.2 km] to the north)- Note: The GPS coordinates that we are using for Georgetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Pope County
- Knoxville
(7 miles [11.3 km] to the northwest) - New Blaine
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for New Blaine
- New Blaine is located in Logan County
- Jump to TripAdvisor's Tourism page for New Blaine <2>
- Dardanelle
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Dardanelle
- Dardanelle is located in Yell County
- Population from the 2020 Census: 4,498 people
- Jump to TripAdvisor's Tourism page for Dardanelle <2>
- Russellville
(8 miles [12.9 km] to the east)- Jump to our Gazetteer entry for Russellville
- Russellville is located in Pope County
- Population from the 2020 Census: 29,364 people
- Jump to TripAdvisor's Tourism page for Russellville <2>
- Chickalah
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Chickalah
- Chickalah is located in Yell County
- Bernice
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Bernice
- Bernice is located in Pope County
- Taral
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Taral
- Taral is located in Pope County
- Ross
(10 miles [16.1 km] to the north) - Center Valley
(11 miles [17.7 km] to the east)- Jump to our Gazetteer entry for Center Valley
- Center Valley is located in Pope County
- Dover
(11 miles [17.7 km] to the northeast)- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Pope County
- Population from the 2020 Census: 1,445 people
- Jump to TripAdvisor's Tourism page for Dover <2>
- Lamar
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Lamar
- Lamar is located in Johnson County
- Population from the 2020 Census: 1,729 people
- Jump to TripAdvisor's Tourism page for Lamar <2>
- Pottsville
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Pottsville
- Pottsville is located in Pope County
- Population from the 2020 Census: 3,361 people
- Former names for Pottsville:
- Pott's Inn
- Pott's Station
- Centerville
(14 miles [22.5 km] to the southeast)- Jump to our Gazetteer entry for Centerville
- Centerville is located in Yell County
- Silex
(14 miles [22.5 km] to the north) - Spadra
(14 miles [22.5 km] to the northwest) - Hagarville
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Hagarville
- Hagarville is located in Johnson County
- Petit Jean
(15 miles [24.1 km] to the south)- Note: The GPS coordinates that we are using for Petit Jean have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Petit Jean
- Petit Jean is located in Yell County
- Holla Bend
(15 miles [24.1 km] to the southeast)- Note: The GPS coordinates that we are using for Holla Bend have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holla Bend
- Holla Bend is located in Pope County
- Clarksville
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Johnson County
- Population from the 2020 Census: 9,721 people
- Jump to TripAdvisor's Tourism page for Clarksville <2>
- Morrison Bluff
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Morrison Bluff
- Morrison Bluff is located in Logan County
- Population from the 2020 Census: 78 people
- Scranton
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Scranton
- Scranton is located in Logan County
- Population from the 2020 Census: 233 people
- Ludwig
(16 miles [25.7 km] to the northwest)- Jump to our Gazetteer entry for Ludwig
- Ludwig is located in Johnson County
- Scottsville
(16 miles [25.7 km] to the northeast)- Jump to our Gazetteer entry for Scottsville
- Scottsville is located in Pope County
- Sand Ridge
(16 miles [25.7 km] to the west)- Note: The GPS coordinates that we are using for Sand Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sand Ridge
- Sand Ridge is located in Logan County
Off-the-Road Links ...
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pledger Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.3012, Longitude: -93.2805 In this case, the coordinates for the Pledger Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |